Oumier Wasp Nano

Oumier's latest atomiser is the Wasp Nano, a low profile 22mm single coil RDA featuring an Ultem top cap, side airflow and a BF pin for use with squonking mods. The Wasp Nano is also available at a price point which won't sting your wallet, with many UK retailers listing it for sale under £20!

by Dan Willis
Aug 14, 2017

Share on:

There's been a healthy amount of buzz around the Oumier Wasp Nano since it's recent release, so let's have a look at how it stacks up...

Specs

22mm width
22.5mm height
Low profile RDA
Ultem top cap
Adjustable side airflow
Single coil RDA
Brass or Stainless Steel base options
Adjustable 510 connector
BF pin included for squonking
Budget price

What's in the box?

The Oumier Wasp Nano comes packaged in a small black presentation box bearing the Wasp Nano logo, which also includes a blue flathead screwdriver for the post screws, spare o-rings, spare post screws, a bottom feed pin for squonking and a bag of organic cotton wick.

Design and build quality

Measuring in with a tiny 22mm width and 22.5mm height, the Oumier Wasp Nano is a true low profile RDA, and the exterior has a very unfussy design with no logos present on the Ultem top cap. The drip tip and top cap are all one piece, however certain drip tips will fit into the centre of the Wasp Nano drip tip should you wish to use your own. Build quality is pretty decent overall for a budget RDA, and it looks the business as well.

The base of the Oumier Wasp Nano is available with stainless steel and brass finishes, the base has the Wasp Nano logo engraved on it along with the CE mark and the adjustable 510 pin is located here. This can be removed and swapped over for the included bottom feed pin should you wish to use the Wasp Nano with a squonking mod, however I did find that the 510 pin was very stiff and required a fair bit of force to remove!

Airflow

Airflow on the Oumier Wasp Nano is found at the side, and this will hit your coil directly as your build should line up with both airflow holes. You can adjust the airflow by rotating the top cap, it offers a restricted lung hit when fully open and can be closed down to a fairly loose mouth to lung draw.

Building the Oumier Wasp Nano

The Oumier Wasp Nano is designed as a single coil RDA, and at either side of the deck you will notice that there are post screws each with a cutout underneath to insert your coil leads into. It isn't designed for huge coil builds, but you can get a 3mm diameter coil in there quite happily, and the coil should line up with the airflow holes on each side. The juice well is a little on the small side, and your wick tails should trail down into this at either side of your coil. It's a pretty simple RDA to build and get to grips with overall.

Performance

I have been using the Oumier Wasp Nano with a SS 316 clapton coil, that has a 2.5mm diameter, and a resistance of 0.5ohm. Flavour wise, the Oumier Wasp Nano really does pack a punch, it has a nice and warm vape packed with plenty of flavour. Flavour delivery is very smooth and the Wasp Nano isn't particularly loud either when taking a draw, although it can occasionally whistle.

The Ultem top cap does a great job of cutting down on heat, and as a result the Wasp Nano doesn't ever seem to get too hot during use. It isn't designed for super low resistance builds and triple figure wattage, but I have been able to put up to 70W through it quite comfortably. It's not a particularly airy atty, but it does put out some fairly dense clouds when it needs to.

A bottom feeding pin is also included for squonking use, and the Oumier Wasp Nano is a really useful little squonking atty. You do need to be careful as it can be quite easy to oversquonk and get leaks, due to the small juice well and airflow positioning.

Conclusion

The Oumier Wasp Nano is a very well made, low profile single coil RDA that is pretty simple to build, and delivers excellent flavour. With a BF pin included, it's also an excellent choice for squonkers, and you can't really go wrong with the sub £20 price point either. This is a real steal at this price point, and an atty I would highly recommend!

Dan Willis

Reviewer at POTV

View Articles

Dan was an early adopter of vaping as a way to quit smoking and has seen and done pretty much all there is to see and do in the vaping world! From Ego batteries to mechs and from rebuildables to pods there isn't much that Dan hasn't tried.

Join the discussion

Squonking Reviews

BP Mods Tomahawk SBS Squonker

Do you like to squonk? Do you like a nice tank? Do you want it all? Well the BP Mods Tomahawk SBS Squonker might be just the kit you are looking for

by Antony Lord
Nov 20, 2023

Squonking Reviews

Smartohmic Squeeze

If you want something completely unique and personal, check out the new Smartohmic Squeeze Mechanical Squonk Mod! Simon had fun customising his own for our review