POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Build in a Narda RDA

Discussion in 'Rebuildable Mods and Devices' started by Social Misfit, Apr 2, 2020.

  1. Social Misfit

    Social Misfit Achiever

    Joined:
    Jan 10, 2020
    Messages:
    2,100
    Likes Received:
    1,312
    I have a Narda RDA that i had never used before.
    The reason for this is i could not manage to get a build in the fucker.
    This must have been designed by a sadist.
    Tonight i managed to get a build in it after much perseverance (Still to test it)
    Is there an easy way to do this RDA?
     
  2. BULLDOG1964

    BULLDOG1964 Legend

    Joined:
    Aug 8, 2017
    Messages:
    12,017
    Likes Received:
    9,023
    Dont own this RDA myself but there are some build vids on youtube.
     
    • Like Like x 1
  3. BigCloud

    BigCloud Achiever

    Joined:
    Nov 11, 2018
    Messages:
    4,932
    Likes Received:
    5,618
  4. flearider

    flearider Postman

    Joined:
    Jan 5, 2018
    Messages:
    692
    Likes Received:
    368
    just bend the legs straight out from the coil .. attach then with coiling rod slight twist ..cotton and go .. round .3-.5 ohms is good .. 20-40w :)
     
    • Like Like x 1
    • Thank Thank x 1
  5. oldhippydude

    oldhippydude Veteran

    Joined:
    Apr 6, 2014
    Messages:
    5,371
    Likes Received:
    4,386
    I assume you are just not used to trapping wire under screws.
    You just have to practice. The large narda screw heads make it easier.

    Certainly keep the coiling rod in till you have attached the wires.
    Always wrap the wire clockwise round the screws so they get pulled tighter as you tighten the screw.

    Hold the coiling rod in place with one hand, while using the other to tighten the screws. Use your third hand to pull the wire tight.

    If you do not have three hands you could mount the rda on something solid. I started building using a large heavy vice holding a 510 connector.

    A liitle practice, and you find ways to hold everything in place with only two hands.
     
    #5 oldhippydude, Apr 2, 2020
    Last edited: Apr 2, 2020
    • Like Like x 2
    • LOL LOL x 2
  6. flearider

    flearider Postman

    Joined:
    Jan 5, 2018
    Messages:
    692
    Likes Received:
    368
    if your using 26g or thinner just wrap the wire round the screw once .. and tighten
     
    • Like Like x 1
  7. tony68

    tony68 Veteran

    Joined:
    Jul 9, 2016
    Messages:
    5,408
    Likes Received:
    5,380
    Todds put up a revisited type of thing. Have a look from 21.00. I've forgotten about mine so during lockdown gonna revisit all of my little rda,s
     
    • Thank Thank x 1
  8. tony68

    tony68 Veteran

    Joined:
    Jul 9, 2016
    Messages:
    5,408
    Likes Received:
    5,380
    This is the easiest way way to put in a coil. Good luck
     
    • Like Like x 1
  9. Social Misfit

    Social Misfit Achiever

    Joined:
    Jan 10, 2020
    Messages:
    2,100
    Likes Received:
    1,312
    Looks a lot easier with the larger screw heads
    Do you know the size of them ?
     
  10. tony68

    tony68 Veteran

    Joined:
    Jul 9, 2016
    Messages:
    5,408
    Likes Received:
    5,380
    I think all the screw heads are the same size, I could be wrong. Im sorry dont know the screw size. Some on here will.
     
    • Thank Thank x 1

Share This Page