3avape
Achiever
- Joined
- May 3, 2017
- Messages
- 1,645
Product introduction
Asmodus Minikin 3S Kit, including a Minikin 3S Mod and a Viento Tank, is powered by dual 18650 batteries with 200W maximum output power. The Minikin 3s features a fingerprint sensor, an aesthetically pleasing carbon fiber strip as well as wireless charging capabilities.
On top of the meticulously crafted comfortable exterior lies the all new GX-200-UTC chipset, the most advanced Asmodus board yet. The chip offers the most accurate temperature control mechanics to date with full support for Ni200 Nickel, Ti Titanium, SS316, SS317, and SS304 with fully adjustable TCR and TFR functionality right out of the box.
As for the Viento Sub Ohm Tank, it takes a beating that is comprised of premium stainless steel and pyrex glass and offers enhanced durability in the form of a stainless steel ring that is doubles as an accent as well as an impact protector for the glass section of the tank.
Parameters:
Minikin 3S Mod
Zinc alloy construction
510 thread connection
Advanced GX-200-UTC Chipset
Temp range: 212- 572℉/ 100- 300℃
Atomizer resistance range: 0.1- 3.0Ω
Power output range: 5- 200W (VW/ Curve Mode)
5- 120W (Temp Control Mode)
User programmable wattage curve mode
Adjustable TCR and TFR functionality
Powered by dual 18650 batteries (Not included)
Temperature control presets for Ni200, Titanium, SS316, SS317, and SS304
Viento Tank
26.9mm diameter
4.0ml juice capacity
510 thread connection
SS & pyrex construction
Removable protective ring
Features:
-Upgrade-able Firmware Support
-Low-Resistance & ESD Protection
-Haptic Feedback Indicates Error Message
-Integrated Fingerprint Sensor & Accelerometer
-USB Type-C Firmware Upgrade and Charging Port
-Crisp High Definition Full-Color Touchscreen
-Reverse Polarity & Short-Circuit Protection
-Low-Voltage & High-Resistance Protection
-Over-Charge, Overheat & Overtime Protection
-Sliding Hinged Top Fill Mechanism
-Compatible with Smok Baby Beast Coil Heads
-Snakeskin Patterned Wide Bore 810 Delrin Drip Tip
Package includes:
1x Minikin 3S Box Mod
1x Viento Sub Ohm Tank
1x 0.2ohm Mesh Coil
1x Replacement Glass
1x Spare Parts Bag
1x USB Type-C cable
1x Battery Warning Card
1x User Manual
Asmodus Minikin 3S Kit, including a Minikin 3S Mod and a Viento Tank, is powered by dual 18650 batteries with 200W maximum output power. The Minikin 3s features a fingerprint sensor, an aesthetically pleasing carbon fiber strip as well as wireless charging capabilities.
On top of the meticulously crafted comfortable exterior lies the all new GX-200-UTC chipset, the most advanced Asmodus board yet. The chip offers the most accurate temperature control mechanics to date with full support for Ni200 Nickel, Ti Titanium, SS316, SS317, and SS304 with fully adjustable TCR and TFR functionality right out of the box.
As for the Viento Sub Ohm Tank, it takes a beating that is comprised of premium stainless steel and pyrex glass and offers enhanced durability in the form of a stainless steel ring that is doubles as an accent as well as an impact protector for the glass section of the tank.
Parameters:
Minikin 3S Mod
Zinc alloy construction
510 thread connection
Advanced GX-200-UTC Chipset
Temp range: 212- 572℉/ 100- 300℃
Atomizer resistance range: 0.1- 3.0Ω
Power output range: 5- 200W (VW/ Curve Mode)
5- 120W (Temp Control Mode)
User programmable wattage curve mode
Adjustable TCR and TFR functionality
Powered by dual 18650 batteries (Not included)
Temperature control presets for Ni200, Titanium, SS316, SS317, and SS304
Viento Tank
26.9mm diameter
4.0ml juice capacity
510 thread connection
SS & pyrex construction
Removable protective ring
Features:
-Upgrade-able Firmware Support
-Low-Resistance & ESD Protection
-Haptic Feedback Indicates Error Message
-Integrated Fingerprint Sensor & Accelerometer
-USB Type-C Firmware Upgrade and Charging Port
-Crisp High Definition Full-Color Touchscreen
-Reverse Polarity & Short-Circuit Protection
-Low-Voltage & High-Resistance Protection
-Over-Charge, Overheat & Overtime Protection
-Sliding Hinged Top Fill Mechanism
-Compatible with Smok Baby Beast Coil Heads
-Snakeskin Patterned Wide Bore 810 Delrin Drip Tip
Package includes:
1x Minikin 3S Box Mod
1x Viento Sub Ohm Tank
1x 0.2ohm Mesh Coil
1x Replacement Glass
1x Spare Parts Bag
1x USB Type-C cable
1x Battery Warning Card
1x User Manual
