Coil is changing ohms....
- Thread starter Norwaype
- Start date
scottish-jim
Achiever
- Joined
- Aug 16, 2015
- Messages
- 2,141
Hello @Norwaype and welcome to POTV. 
I have an Expromizer V4 and find it can be a bit weird at times. For example if I put it on my Aegis Solo the mod gives me the no atomizer message sometimes. Fine on any other mod though.
I've noticed the resistance does change but not as much as you've said.
I'd be interested to know your coil build details and expected resistance. 30W sounds a bit high for a MTL Coil.
I have had difficulty mounting the coil a few times and getting different readings when wicking. I found this happened more when I was using 28awg and better with 26awg. It seems easy to disturb the coil on the V4.
My guesses would be a coil mounting issue or your mod doesn't like the Expromizer.
I have an Expromizer V4 and find it can be a bit weird at times. For example if I put it on my Aegis Solo the mod gives me the no atomizer message sometimes. Fine on any other mod though.
I've noticed the resistance does change but not as much as you've said.
I'd be interested to know your coil build details and expected resistance. 30W sounds a bit high for a MTL Coil.
I have had difficulty mounting the coil a few times and getting different readings when wicking. I found this happened more when I was using 28awg and better with 26awg. It seems easy to disturb the coil on the V4.
My guesses would be a coil mounting issue or your mod doesn't like the Expromizer.
Ferrum1905
Postman
- Joined
- Dec 29, 2019
- Messages
- 110
As a an experienced MTL user, it is 90% a loose coil. There is one more option as i had faced before. If you have another mod to try on, try your ato on it. Sometimes 510 pins are not as long as they should be and you face these issues.
Similar threads
