gbalkam
Postman
- Joined
- Jul 2, 2016
- Messages
- 356
Need:
base from kanger toptank/subtank mini (build deck) with RBA
*Build your coil and wick as desired*
reassemble RBA leaving top screw cap OFF. (use only base and sleeve of atty)
**Will also work if you put the screw cap on, but harder to re-drip**
Need:
1x 1/4 inch (6.35mm) drill bit
1 cap from empty ejuice bottle (should be a child proof cap)
Drill hole through bottom of cap through to top and run up and down the drill bit a couple times to smooth
Place new "chuff cap" over the open RBA...
Drip away
Why? Just because you can!
Use: Showing off to your vaping nerd buddies
Testing coil build on the RBA without reassembling the whole thing
Also useful for changing flavors without having to rewick your RBA (though you will need to change the juice in the tank.
base from kanger toptank/subtank mini (build deck) with RBA
*Build your coil and wick as desired*
reassemble RBA leaving top screw cap OFF. (use only base and sleeve of atty)
**Will also work if you put the screw cap on, but harder to re-drip**
Need:
1x 1/4 inch (6.35mm) drill bit
1 cap from empty ejuice bottle (should be a child proof cap)
Drill hole through bottom of cap through to top and run up and down the drill bit a couple times to smooth
Place new "chuff cap" over the open RBA...
Drip away
Why? Just because you can!
Use: Showing off to your vaping nerd buddies
Testing coil build on the RBA without reassembling the whole thing
Also useful for changing flavors without having to rewick your RBA (though you will need to change the juice in the tank.
Last edited:
