Freemaxtech
Postman
- Joined
- Sep 11, 2019
- Messages
- 737
Has Autopod50 Pod Mod Kit attracted you and do you want to get one? Now please allow me to introduce some instructions for Freemax Autopod50.
How to use Autopod50?
To turn the device on, you just need to click the fire button for the standard five clicks on and 5 clicks for off.
To lock the screen, you need hold the +/- button simultaneously for 1 second.
Using the standard up/down buttons to vary the wattage.
With a nice bright OLED screen, you can read the wattage, resistance, battery life and so on.
How long do you need to charge Freemax Autopod50?
With Type-C and 2A Fast Charging function, it only takes 30 minutes to charge from 1% to 50% and 80 minutes from 1% to 100%, your device will always has the power you need for a full day's use.
How to refill Autopod50 Pod?
1. Open from the air slot, simply pull Autopod50 Pod from the very strong magnets on the device.
2. Slightly open up the blue silicone plug
3. Refill vape juice from the bottom of Autopod50 Pod then close it
4. Let Autopod50 Pod stand 5 minutes to get the Tea Fiber Cotton completely saturated
Two AX2 Mesh Coils provided for Autopod50 with distinct wattage range as below, Airflow Control is available for both coils for better vaping experience.
Autopod50 AX2 Mesh Coil 0.25ohm (30-50W, Best 40W)
Autopod50 AX2 Mesh Coil 0.5ohm (15-35W, Best 30W)
How to use Autopod50?
To turn the device on, you just need to click the fire button for the standard five clicks on and 5 clicks for off.
To lock the screen, you need hold the +/- button simultaneously for 1 second.
Using the standard up/down buttons to vary the wattage.
With a nice bright OLED screen, you can read the wattage, resistance, battery life and so on.
How long do you need to charge Freemax Autopod50?
With Type-C and 2A Fast Charging function, it only takes 30 minutes to charge from 1% to 50% and 80 minutes from 1% to 100%, your device will always has the power you need for a full day's use.
How to refill Autopod50 Pod?
1. Open from the air slot, simply pull Autopod50 Pod from the very strong magnets on the device.
2. Slightly open up the blue silicone plug
3. Refill vape juice from the bottom of Autopod50 Pod then close it
4. Let Autopod50 Pod stand 5 minutes to get the Tea Fiber Cotton completely saturated
Two AX2 Mesh Coils provided for Autopod50 with distinct wattage range as below, Airflow Control is available for both coils for better vaping experience.
Autopod50 AX2 Mesh Coil 0.25ohm (30-50W, Best 40W)
Autopod50 AX2 Mesh Coil 0.5ohm (15-35W, Best 30W)
