What's new

The REAL Lavatube Version 2 is OUT!

K

KulrMeStoopid

Guest
http://www.volcanoecigs.com/lavatube-version2-kit.html

lavatube-group1.jpg
lavatube2-kit.jpg
lavatube-group2_2.jpg


[h=3]Variable Voltage Vaping with Volcanoecigs.[/h]Say hello, again to the all new LAVATUBE Version 2! It's time to to take your vaping experience to the next level with a device tuned like no other! The all new LAVATUBE Version 2 is a specially designed variable voltage electronic cigarette that provides you with anywhere from 3 to 6 volts of vaping power with the easy click of a few buttons. Our team spent many months designing this device and there are many high tech features that separate the LAVATUBE Version 2 from the crowd. Here are the full set of specs:
[h=3]LAVATUBE Version 2 Features:[/h]Lightweight aluminum alloy body
Anodized aluminum finish
1 power / activation button
1 Voltage up button
1 Voltage down button
1 Bright blue LCD screen
1 510 threaded connection
1 Lanyard clip
2 vent holes
18650 and 18700 battery compatability
[h=3]Tech Specs:[/h]Selectable Voltage Range: 3v to 6v in 0.1v increments
Power / Activation Button: Click five times fast to power the device on / off; Hold the button down to activate.
+ Button: On press, increases voltage by .1 increments between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts
- Button: On press, decreases voltage by .1 increments between 3volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts.
Regulated Output: Advanced pulse-width modulation power output with accurate voltage settings tuned to VRMS
Auto Shutoff: If the activation button is held down for 15 seconds or longer, the LAVATUBE Version 2 will shut itself off until the button is released to prevent overheating the atomizer and the device.
Short Circuit/Atomizer Protection: The LAVATUBE Version 2 can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the LAVATUBE Version 2 from being damaged.
Reverse Battery Protection: Protects the device in case you put the battery in the device backwards
Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically display "LO" on the display and turn off when the battery is discharged, preventing damage to the battery and the device by overly depletion.
Battery Voltage Meter: The LAVATUBE Version 2 has a voltage meter built in, simply press and hold the - button for 5 seconds and it will display the voltage of the battery. This way you can monitor the power left in the battery before it needs to be recharged. 18650 batteries provide 4.2v at peak charge and over the life of the battery that voltage will decrease to about 3.2v level before needing to be recharged. This will help you monitor the life cycle of the battery.
Atomizer Ohm Meter: The LAVATUBE Version 2 has an atomizer ohm meter built in, simply press and hold the + button for 5 seconds and it will display the ohm's resistance of the atomizer that is connected to the device.
Amperage Limiting: 3 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.
Vent holes: 2 Vent holes on the bottom of the device for added safety
[h=3]The LAVATUBE Kit Includes:[/h](1) LAVATUBE Version 2 in the color of your choosing
(1) Black cushioned LAVATUBE carry case
(1) AW IMR 1600 mAH High Drain 18650 rechargeable LiMN battery
(1) XTAR WP2 II multi-charger
(1) 7ml Chrome Tube Tank Vapor Delivery System with 3.0 ohm cartomizer and plastic drip tip
(1) 15ml Bottle of USA-Made Premium eLiquid in the strength and flavor of your choosing
[h=3]*Special Warranty Information:[/h]The LAVATUBE Version 2 unit will include a 1 Year Limited Warranty against any manufacturing defects from the date of purchase.
The AW IMR 1600 mAH High Drain 18650 LiMN Rechargeable Batteries will be warrantied for 90 days from the date of purchase. Please make sure to fully charge your batteries in-between use and to follow safe storage practices when they are not being used.
For a complete listing of written instructions for the Lavatube Version 2 Kit, please visit this forum link:
http://www.volcanoecigs.com/forum/lavatube-kit-instructions-t10379.html
 
Now who's getting me one for xmas :( I really want one of these!
 
Is it me or are PVs following the same route as mobile phones and laptops have. Colours look great though.

Good looking product, I hope it performs well and hits the right voltages
 
I think they might have taken too long to get this out. I hope not as it does look nice but there has been a hell of a lot of new mods out recently that all do the same. This is nothing revolutionary which is a shame as it is the original! Unfortunately the Chinese have stolen their thunder IMHO.
 
I like the fire button. Reminiscent of the Silver Bullet
 
but you have a Provari!
sentimental :( I miss my princess who's taken to her grave somewhere at Ethel's house... Tube 2 and 3 are standing broken and at attention like good lil soldiers though! Maybe I can get them both fixed who knows!
 
The original black one was my first VV I think but didn't get on with it and practically gave it away on UKV. The one I bought my g/f kept not firing even in SR gear and is about to be chucked.
Thank heavens for our Provaris :D

These do look good but there's a growing array of inexpensive VV and VW devices now (was gonna say mods but something stopped me) and more competition.
 
Back
Top Bottom