Separate names with a comma.
Wanting to join the rest of our members? Why not sign up today!
Discussion in 'Everything ECigs' started by Badawy, Aug 11, 2019.
can I build an mtl coil with that wire
If so how many wraps do I need to do ?
Try and see, start with a 3mm coil at about 8 wraps and see what that gives you or alternatively use the steam engine coil / wire tool on their website. More often than not is quicker to just wrap a coil and see what it gives you.
Not ideal but you certainly can if you want. There is no hard and fast rules on required resistance or power used for mtl. Just comes down to what you like. Personally, I would make a 3mm coil with 5 wraps. Will be .31 ohm. More wraps will be too much metal and too big, imho. Will get very hot in a small chamber. Besides, even 10 wraps will only give .6 ohm. Start with 5 wraps and see how you go would be my advice.
I think the biggest challenge might be wicking on a tri-core fused clapton.
If it were me personally, I wouldn't bother and get a reel of something more appropriate. But go for it and see what happens
Cut a length long enough to do a 8 wrap coil, get your tweezers and pick the end until you get the thin wrap wire lose then unwrap the 3 28g wires and you will have enough to make 3 coils
The place where I was only had one vape store and it only sold DTL wires.
Thats smart this actualy saved me. I could thank you back then as I couldn't login.
I think you could, just don't vape nic salt e-juices on that one.