POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Below 0.10 ohm

Discussion in 'Everything ECigs' started by Squeeb84, Sep 11, 2019.

  1. Squeeb84

    Squeeb84 Postman

    Joined:
    Sep 19, 2016
    Messages:
    94
    Likes Received:
    55
    Hi fellow apes I'm after a bit of advice. I'm after a new regulated dual battery mod but want one that will go below the 0.10 ohm cut off. I've done a few builds that go to 0.9 or 0.7 but apart from the old snowwolf vfeng none of my other mods will do this.
    I can't afford a dna mod (although would love one)
    Any recommendations would be appreciated
     
  2. pdg

    pdg Achiever

    Joined:
    Oct 24, 2018
    Messages:
    1,150
    Likes Received:
    825
    Just about all the ones I've seen state they fire down to 0.05ohm...
     
  3. SirLugg

    SirLugg Legend

    Joined:
    Jan 31, 2016
    Messages:
    11,464
    Likes Received:
    13,358
    All DNA devices go well below that, I've not tested it but I think it's. 0.5. I'm almost positive Asmodus (Minikin et Al) got to. 8, Voopoo Drag goes to. 05, Yihi Chips go to.0.7(?), Ijoy mods go to 0.6....Theres a fair few.

    How come you're ohming out at 0.7 on a regulated? Or is that before pinching and pulsing?
     
  4. Leni

    Leni Achiever

    Joined:
    Feb 2, 2017
    Messages:
    4,549
    Likes Received:
    4,009
    What’s wrong with 0.9 or 0.7 ohms? :S
     
  5. Squeeb84

    Squeeb84 Postman

    Joined:
    Sep 19, 2016
    Messages:
    94
    Likes Received:
    55
    I forgot to mention I want it in power/wattage mode for the 0.8 and 0.9
     
  6. Squeeb84

    Squeeb84 Postman

    Joined:
    Sep 19, 2016
    Messages:
    94
    Likes Received:
    55
    Yes and no lol I love my aliens and simuler coils and in dual they tend to fall just under the 0.10 ohm mark and with certain rda/rta's adding an extra wrap would mean squeezing the legs into position.
    My voopoo x217 does go below but I'm not a fan of the mod and recently bought a minikin v3 from a friend but it says it will only fire to 0.1
     
  7. SirLugg

    SirLugg Legend

    Joined:
    Jan 31, 2016
    Messages:
    11,464
    Likes Received:
    13,358
    Try it bud. I'm not sure tbh but I have a minikin 1.5 and that goes to. 08. I've also have a minikin Reborn and that went to 0.8 too.

    Voopoo Drag sounds like a shout then. Solid mod, not expensive either.
     
  8. SirLugg

    SirLugg Legend

    Joined:
    Jan 31, 2016
    Messages:
    11,464
    Likes Received:
    13,358
    I think he means. 09 and. 07 because he mentioned the only firing down to bit.
     
    #8 SirLugg, Sep 11, 2019
    Last edited: Sep 11, 2019
    • Like Like x 1
  9. Squeeb84

    Squeeb84 Postman

    Joined:
    Sep 19, 2016
    Messages:
    94
    Likes Received:
    55
    Just gave it a go and yes it does fire below the 0.10 spose I should have tried first lol. I've had my eye on the drag 2 for a while and I'm thinking they should have the same chip but will look it up.
     
  10. Squeeb84

    Squeeb84 Postman

    Joined:
    Sep 19, 2016
    Messages:
    94
    Likes Received:
    55
    Sorry matey meant 0.09 and 0.07 ohms
     
    • Like Like x 1

Share This Page