pulse mech mod......

[BULLDOG1964]

As iam new to mech mods iam planing on getting myself a Vandy vape pulse bf mech so i am looking for a bit of advice on which battery would be best to use in 18650 and 20700 on my other mech i have i vape at around 0.24 and would like to be the same on the pulse i have 2 molicel 20700a here already and 2 vapcell 20700 would these be ok to use or would i be better off by getting Ijoy 20700 40a for at the ohms i shall be using it at as i said before some advice on what 18650s would be best to use on this mech many thanks............

 

[mattyk2010]

As iam new to mech mods iam planing on getting myself a Vandy vape pulse bf mech so i am looking for a bit of advice on which battery would be best to use in 18650 and 20700 on my other mech i have i vape at around 0.24 and would like to be the same on the pulse i have 2 molicel 20700a here already and 2 vapcell 20700 would these be ok to use or would i be better off by getting Ijoy 20700 40a for at the ohms i shall be using it at as i said before some advice on what 18650s would be best to use on this mech many thanks............

Use your molicel 20700 mate and I wouldn't bother with the 18650 option with the silly little battery adapter especially if your pulse doors are see through as it will look a bit daft but if your going to use 18650 then the molicel p26a is your best 18650 and second is VTC5A

 

[BULLDOG1964]

Use your molicel 20700 mate and I wouldn't bother with the 18650 option with the silly little battery adapter especially if your pulse doors are see through as it will look a bit daft but if your going to use 18650 then the molicel p26a is your best 18650 and second is VTC5A

Thats great mate thanks for your advice i will be using the see though doors so will stick to the 20700s then mate thanks again........

 

[cliveh2]

Just ordered a couple of the molicel for exactly the same reason!!! (20700)
What's the chance of squeezing a 21700 in there?

 

[mattyk2010]

Just ordered a couple of the molicel for exactly the same reason!!! (20700)
What's the chance of squeezing a 21700 in there?

The door won't fit properly with a 21700 and makes squonking 1 handed a pain in the ass with the door movement but it will go in

 

[cliveh2]

The door won't fit properly with a 21700 and makes squonking 1 handed a pain in the ass with the door movement but it will go in

Cheers bud, only got 1 21700 was thinking of grabbing a couple more but won't bother if it's a pita[emoji3]

 

[mattyk2010]

Cheers bud, only got 1 21700 was thinking of grabbing a couple more but won't bother if it's a pita[emoji3]

I tried a 21700 molicel and the front panel lifts near the squonk window so depending on how you hold it as you squonk the door can pop off in your hand [emoji2] I'd stick to the 20700

 

[cliveh2]

I tried a 21700 molicel and the front panel lifts near the squonk window so depending on how you hold it as you squonk the door can pop off in your hand [emoji2] I'd stick to the 20700

So much for wanting a 18650 mod [emoji23] ordered some more 20700 just for the pulse!
Think 18650s are on the way out, now the luxotic has given up the ghost I have 5 cells and nothing to put them in!

 

[mattyk2010]

So much for wanting a 18650 mod [emoji23] ordered some more 20700 just for the pulse!
Think 18650s are on the way out, now the luxotic has given up the ghost I have 5 cells and nothing to put them in!

Use the 20700 with the ultim panels and your 18650 with the cyan panels as you won't see the adapter with the cyan as there solid colour and not see through [emoji6]

 

[Deleted member 54254]

The vapcell 20700's (yellow wrap) rock on the door too, just a smidge too fat.