TC with Smok x cube ultra 220w help

[AdriaNocenzi]

Hi All,
for the first time i would like to give a go with TC mode, i tried i running at 100 c with twin SS coill, but after 3-4 puff i start to get a dried hit, so i can't understand what i'm doing wrong.

Anyone got any suggestions?

 

[nwhornet]

What build (ohm), attie. 100c is too low for starters, 240c is what I start at.
Can't comment on Smoks but have you selected SS as the material & you need to be around 0.3ohm for SS to be consistent.

 

[AdriaNocenzi]

ohm 0.48, ijoy limitess rdta

 

[nwhornet]

Single wire or clapton/fancy. Have you locked the coil resistance at room temp. For TC the wick needs to be loose, little resistance. Too tight a wick & juice can't flow, hence the dry hits.

 

[AdriaNocenzi]

signle wire, i just change the battery and now read 0.84

 

[AdriaNocenzi]

i made the mod to re-check the ohm, and now is 0.57, but it's constantly dried hits, even at 170 c

 

[AdriaNocenzi]

when i go in tc mode, the mod tell me TC-SS 0.00200 and i can lower it down, but i don't know what this value is?

 

[AdriaNocenzi]

i notice in tc mode, while puffing the temperature on the display say only 025c

 

[nwhornet]

when i go in tc mode, the mod tell me TC-SS 0.00200 and i can lower it down, but i don't know what this value is?

It's the tcr/tfr & it's wrong. Think it's 0.008 or there abouts.

Edit: Should be 0.0008

 

[AdriaNocenzi]

I re-sent the atty after it cool down now it seems fine, however the TCR is still at 0.00200