JoeMac Postman Joined Sep 7, 2018 Messages 344 May 29, 2019 #11 John R said: @JoeMac Try a different cable, they're not all the same Some are OK for power but don't handle data. Click to expand... Thanks John, I've already tried a couple but will dig out a few more to try.
John R said: @JoeMac Try a different cable, they're not all the same Some are OK for power but don't handle data. Click to expand... Thanks John, I've already tried a couple but will dig out a few more to try.
red5 Achiever Joined May 14, 2016 Messages 1,928 May 29, 2019 #12 Another thing you could try is downloading the official Eleaf/joyetech/wismec software to see if the mod is recognized on that to eliminate either the cable not being up to the job or the USB on the mod being wonky.
Another thing you could try is downloading the official Eleaf/joyetech/wismec software to see if the mod is recognized on that to eliminate either the cable not being up to the job or the USB on the mod being wonky.
Some are OK for power but don't handle data.
