POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

HERAKLES RTA BY SENSE help

Discussion in 'Rebuildable Mods and Devices' started by Sam Andrews, Nov 13, 2020.

  1. Sam Andrews

    Sam Andrews Postman

    Joined:
    Apr 12, 2020
    Messages:
    998
    Likes Received:
    2,883
    Recieved this as part of a deal today but cant seem to get it apart at all to get to the build deck, have tried clamps, freezer, it comes out as one piece with the chimney but the 2 bottom parts wont come off to leave the build deck. Does anybody know of a solution or way of solving this before I throw it in a draw and give up on my RTA adventure before its began ha
    Cheers
    Sam
     
    • LOL LOL x 1
  2. Smoorecig
  3. zouzounaki

    zouzounaki Olympian

    Joined:
    Dec 13, 2016
    Messages:
    28,315
    Likes Received:
    14,572
    i do t have one, but have you tried turning the chamber? it looks like it threaded and screws off and on.

    upload_2020-11-13_21-6-45.jpeg
     
  4. Sam Andrews

    Sam Andrews Postman

    Joined:
    Apr 12, 2020
    Messages:
    998
    Likes Received:
    2,883
    16053017693855565764331972236197.jpg
    I can get it to this then just no budging at all thank you
     
  5. Grey Haze
  6. zouzounaki

    zouzounaki Olympian

    Joined:
    Dec 13, 2016
    Messages:
    28,315
    Likes Received:
    14,572
    so it looks like you need to screw off the bit with the lion. maybe try elastic bands, or put some cloth over it then some pliers?
     
    • Like Like x 1
  7. zouzounaki

    zouzounaki Olympian

    Joined:
    Dec 13, 2016
    Messages:
    28,315
    Likes Received:
    14,572
    you could also try letting it sit in boiling water for a bit first.
     
    • Like Like x 1
  8. Sam Andrews

    Sam Andrews Postman

    Joined:
    Apr 12, 2020
    Messages:
    998
    Likes Received:
    2,883
    Thank you will try both of those
     
  9. Sam Andrews

    Sam Andrews Postman

    Joined:
    Apr 12, 2020
    Messages:
    998
    Likes Received:
    2,883
    It doesn't even look as it does come off reckon I'll throw it in a draw and buy something new on pay day ha
     
  10. zouzounaki

    zouzounaki Olympian

    Joined:
    Dec 13, 2016
    Messages:
    28,315
    Likes Received:
    14,572
    if you look at the pic i posted above from google images it def looks like the part below the deck is threaded. it’s maybe just over tight or jammed on.
     
    • Like Like x 1
  11. Sam Andrews

    Sam Andrews Postman

    Joined:
    Apr 12, 2020
    Messages:
    998
    Likes Received:
    2,883
    Yeah it must be mate I think its over tight because it looks like it's all one part on mine here, like you say on your pic its clear, almost as if it's gone past the threading to far its gone to deep down
     
  12. andi52

    andi52 Veteran

    Joined:
    May 29, 2015
    Messages:
    5,630
    Likes Received:
    5,182
    It unscrews anticlockwise, as marked by the black arrow

    herakles.jpg
     

Share This Page