POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

0.05 ohm mod?

Discussion in 'Rebuildable Mods and Devices' started by gbalkam, Aug 13, 2016.

  1. gbalkam

    gbalkam Postman

    Joined:
    Jul 2, 2016
    Messages:
    356
    Likes Received:
    112
    Just curious, aside from a mech, are there any regulated mods that will handle a build this low? Or is the clown I just watched on youtube about to become a statistic? (he was hitting 6x m.terk alien coils at 0.28-0.34 ohm per coil) My math is putting him at around 0.05 ohm total.. even lower than the 0.08 my buddy who competes will do on a mech. (he will go 0.08, but recommends 0.2-0.15 for new mech users as a low limit) *0.1 at a bare butt minimum unless you have been vaping for a couple years and know your S@#%.

    PS Thanks to Jason at VaporMax in Halifax, NS for all the information and patience.
     
  2. Smut

    Smut Veteran

    Joined:
    Dec 20, 2015
    Messages:
    6,459
    Likes Received:
    7,746
    Hohm Wrecker, Snowwolf 200w, dna 200 mods, TwistedMesses 150 Watt, Sigelei 200w. I see zero reasons to build that low, build higher and just turn the watts up
     
    • Like Like x 4
  3. philTBA

    philTBA Achiever

    Joined:
    May 16, 2015
    Messages:
    3,504
    Likes Received:
    2,403
    The ijoy A160 0.03, unfortunately, 2x 18650s don't have the guts to fire 0.06.
     
  4. gbalkam

    gbalkam Postman

    Joined:
    Jul 2, 2016
    Messages:
    356
    Likes Received:
    112
    Never said I saw a reason to either.LOL.. I was just wondering wft could he have been firing on. my mod will go down to 0.1 ohm, closest i got was 0.12....... although... my next build might be pushing the limits.. should be just over 0.1. Gonna try a 6 coil build on my Temple. Why? Because i can! Muwhahahahahahahaaaaaaaaaaaaaaaaaaaaaa.. cough choke, .. *snort snort*...
     
  5. Smut

    Smut Veteran

    Joined:
    Dec 20, 2015
    Messages:
    6,459
    Likes Received:
    7,746
    And where did i say anything about your reasoning, i was giving my opinion, build how you want its your face after all
     
    • Like Like x 1
  6. gbalkam

    gbalkam Postman

    Joined:
    Jul 2, 2016
    Messages:
    356
    Likes Received:
    112
    I meant the guy in the video I was watching.. he was firing 6 zippered claptons.. prob around 0.05ohm. My mod goes down to 0.1 ohm. Regulated. I usually build 0.15-0.3 though.
     
    • Like Like x 1
  7. pex

    pex Postman

    Joined:
    Feb 28, 2016
    Messages:
    285
    Likes Received:
    149
    Toot toot.....boooooom!!
     
  8. scrumpox

    scrumpox Veteran

    Joined:
    Jul 11, 2014
    Messages:
    7,023
    Likes Received:
    5,382
    There are quite a few vapers living in glass houses who like throwing stones ...
     
    • Like Like x 1
  9. Simon G

    Simon G Legend

    Joined:
    Apr 12, 2016
    Messages:
    17,547
    Likes Received:
    16,708
    unless you know of a battery with an 85 amp limit, I wouldn't put that on a mech.
     
    • Like Like x 1
  10. gbalkam

    gbalkam Postman

    Joined:
    Jul 2, 2016
    Messages:
    356
    Likes Received:
    112
    Amp limit has nothing to do with it. The only "amp" you need to think about is the "sustained amps".. How many amps the battery can safely sustain over a 5-15 second firing.
    Never go by the amps printed on the label. 30/20 amps means 20 amp sustained.. the 30 is essentially bogus. What you do need is a low internal resistance inside the battery. I'm not into mechs yet, but that can be found on the batteries data sheet. For example.. I just took a puff at 158w, on a 20 amp battery.. it says 25/20 or something.. the amps went up to just over 28 on my display, BUT that was only for a 2.5 second hit.32.5 amp at 200w for 2.95 seconds. OH my build is 0.18 ohm btw.

    Now the important thing is I don't buy cheap batteries. I ask Jason, the Mech specialist at the vape shop, he tells me which batteries to buy. He knows I don't give a rats behind about a few extra $$$ where batteries are concerned.
    Another bit of info.. the internal resistance of a battery lowers as you use it.. so you will get a bigger cloud on your 3rd pull than you did on your first. That's just a bit of info you don't really need much, but good to know. You probably noticed that on a lot of the build videos where the guy builds on a mech.. each cloud is a little bigger than the last one when he vapes the coil.

    OH and btw.. lol I wouldn't put that build on anything. Like I said, that guy was a statistic waiting to happen.
     
    #10 gbalkam, Aug 19, 2016
    Last edited: Aug 19, 2016

Share This Page