POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

Ehpro True MTL RTA

Discussion in 'Mouth to Lung Vaping' started by Crewella, Nov 29, 2018.

  1. Deaf Vaper

    Deaf Vaper Achiever

    Joined:
    Mar 1, 2018
    Messages:
    3,622
    Likes Received:
    3,291
    Yeh..but what's it for? It just goes round...and round...and round........that's it!

    Anyhoo..i haven't fidgeted since i were a wee lad..mibbe i'll give it to me 9yo nephew instead. Mind you, like kids today, i doubt he'll be interested in it....his face is glued to a playstation most of the time!

    I'm so glad i grew up in the 1980's, when video games were simple...like PacMan, today's kids seem to be far too preocupied with electronic gizmo's these day.....not good for them.

    I reckon in decades to come they'll be a massive growth in shortsightedness as a result of modern gaming.

    Anyway.....i've gone :offtopic:
     
  2. Discomatt

    Discomatt Achiever

    Joined:
    Oct 24, 2018
    Messages:
    3,253
    Likes Received:
    3,763
    It’s to stop you fiddling with your bits when not fiddling with your vapes
     
    • LOL LOL x 3
  3. rew

    rew Veteran

    Joined:
    May 18, 2016
    Messages:
    5,194
    Likes Received:
    6,439
    Got one of those too. Got bored and fidgety after 2 mins.
     
    • LOL LOL x 3
  4. Traian Nitu

    Traian Nitu Initiate

    Joined:
    Apr 9, 2019
    Messages:
    13
    Likes Received:
    28
    Hello guys,

    I'm new here, I registered specifically for this thread, but it looks like a cool place, so I guess I'll hang around for a while.
    Anyway, I got the Ehpro true MTL today and I have already 3 wicking tries and I get it flooded all the time. I thought I solved it after reading here that I must trim the ends to not touch the base. I got in 10 clean (and great) puffs, but now I have liquid everywhere :( what am I doing wrong? I am not really a n00b, I have an Ares, a Siren2 and a Vapor Giant M5. No flooding problems ever.
     
  5. Fuctifino

    Fuctifino Achiever

    Joined:
    Nov 26, 2018
    Messages:
    1,035
    Likes Received:
    683
    Where is it flooding ????

    Through the air flow control hole ???
    or
    worse at the bottom of the tank itself ???

    if it is through the AFC hole then raise the coil as too low will increase the risk of leaking through AFC
    better for coil to be a smidge too high than too low - it isn't THAT precise in wicking once you grasp the gist of it

    if it is leaking at the base of the tank onto mod - that is QC & the AFC is slightly oval allowing a poor fit/seal

    if it floods or gurgles asap then change the glass - the bubble glass is quite prone to doing this due to recent poor QC
    the bubble glass if crap like on two True's gurgled straight away - WTF & had to return to std glass on those = no gurgle

    it is a great tank, really is but alas I have some issues with QC on one or two tanks that could/should have been avoided
    (if the QC was better prior to leaving the factory - a shame coz this good tank doesn't need poor QC adding to its minor slight qwirks)
    Not really a qwirk as such, just need to suss the technique, but really not a biggy unless you have a suspect tank to begin with

    Really after you suss the coil height - not too low, the wicking or tail lengths etc... you "should" be golden
    hope some of this crap (most of which I posted before), hope some of this helps
     
    • Like Like x 2
  6. zouzounaki

    zouzounaki Legend

    Joined:
    Dec 13, 2016
    Messages:
    20,225
    Likes Received:
    10,570
    It sounds a bit fussy.
     
  7. rew

    rew Veteran

    Joined:
    May 18, 2016
    Messages:
    5,194
    Likes Received:
    6,439
    Not really using mine at the moment, but when I did I didn't get any problems with it. Could be a QC issue. Check O rings and maybe replace them.
     
    • Like Like x 1
  8. Traian Nitu

    Traian Nitu Initiate

    Joined:
    Apr 9, 2019
    Messages:
    13
    Likes Received:
    28
    I'll try this tomorrow.
    There was no leaking at the bottom, just through the airflow. And upwards in my mouth, it felt like the whole bell was full of liquid :(
     
    • Like Like x 2
  9. rew

    rew Veteran

    Joined:
    May 18, 2016
    Messages:
    5,194
    Likes Received:
    6,439
    Can you post pics of your build?
     
  10. Fuctifino

    Fuctifino Achiever

    Joined:
    Nov 26, 2018
    Messages:
    1,035
    Likes Received:
    683
    juice in ya mush is serious flooding, also try the other glass
    the bubble was wanked on 2 of mine but you "might" have a wanked straight std glass so consider trying the bubble or vice versa
    one bubble was a bit oval-ish & another had a slight chip in it
    when I assembled these I knew almost straight away was fucked coz these True's don't flood unless something is fucked like glass/seal

    These tanks don't really flood or gurgle, they might leak until you suss it but they don't really flood unless something is way out of whack
    (well so I found, but I might have just sussed the wicking bollocks on them)

    The coil should sit about 2mm above the jet/hole - other tanks you can sit the coil really low but not too low on the True's

    no fancy coils - just some kanthal 6 or 7 wraps maybe producing 1.2 Ohms give or take a bit maybe about 11w give or take a watt perahps
    or until you get the flavour - shouldn't need mega watts on this tank, really shouldn't need it - but you'll suss what coil/watts works
    (you're not a noob)

    think raise the coil a smidge and check the glass/seals if she floods/gurgles, coz that is a sign of a bad seal on that True tank especially
     
    • Like Like x 3

Share This Page