POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Clapton Wire for Limitless RDTA??

Discussion in 'All Things Mesh and Genesis' started by krish123, Jan 18, 2017.

  1. krish123

    krish123 Initiate

    Joined:
    Oct 19, 2015
    Messages:
    42
    Likes Received:
    3
    Hi,

    recently got the limitless RDTA and very happy with it, it came with 2 Clapton coils ohming out at around 0.3Ohms.

    I used them in single coil config and enjoyed it.

    I now want to buy my own Clapton wire as I have run out of the ones supplied with the tank.

    What Guage wire do I need for a 0.3-0.4 ohm single coil build?

    Also If I were to dual coil at that ohm range what guage wire would I need then?

    To be clear I don't want to make my own Clapton wire just prebuilt stuff that I can wrap and put into the tank.

    Cheers,
     
  2. Dank vape

    Dank vape Initiate

    Joined:
    Sep 9, 2016
    Messages:
    34
    Likes Received:
    6
    26gx30g i use i get around .45 at 5 wrap with duel coil
     
  3. Gothictwist

    Gothictwist Postman

    Joined:
    Dec 29, 2016
    Messages:
    232
    Likes Received:
    114
  4. krish123

    krish123 Initiate

    Joined:
    Oct 19, 2015
    Messages:
    42
    Likes Received:
    3
    Thanks for the replies guys.

    Using the steam engine calc I think 24g wire will be best for me, I can single coil and doil coil with that wire.

    Also is it best to go with kanthal Clapton wire or other material?

    any good shops you recommend where I can find what im after?
     
  5. Gothictwist

    Gothictwist Postman

    Joined:
    Dec 29, 2016
    Messages:
    232
    Likes Received:
    114
    Unless your using a regulated Mod that can dump loads of power into it id stay away from kanthal. I find it takes to long to ramp up otherwise especially on the mech, My preference is 317 or 316 SS
     

Share This Page