Roosterado
Postman
- Joined
- Jun 15, 2014
- Messages
- 82
This time I modified my single wick RSST with a Silver plated positive pin. I had previously done the same to my dual wick RSST-pyrex tank-adjustable airflow. I also modified this single wick RSST for a 3mm silica U-Wick. It is wicking a vaping well with a 28ga kanthal 7 wrap coil at 1.5ohm. I wanted to try the 3mm silica before buying a ft of ReadyxWick. Drilled out fill hole to to a
little over 3mm. I drilled a small fill hole- its hidden behind the positive post in this pic.
little over 3mm. I drilled a small fill hole- its hidden behind the positive post in this pic.
Attachments
Last edited: