Raguri
Nutter!
- Joined
- Mar 2, 2013
- Messages
- 8,106
So, I have two igo m rdas, even though ones not for me I thought that loosing mine wouldn't be the end of the world since they are available in the UK...
The stock post holes, are a tight squeeze for 0.6 kanthal, and, being me I wanted more. I wanted parallels.
So, take one 1.5mm drill bit and slowly drill the post holes.
Then, do 4 wraps parallel 0.5, around 2mm.
Then, blow your cock off when you forget the airflow is set to nothing as you forgot to put the top cap on.
I like these.
I like these a lot.
Its hot with the airflow wide open...
The madman strikes once more.
No videos yet, but once I do a better build in it, there will be. This one was purely to see if they fit which they now do
The stock post holes, are a tight squeeze for 0.6 kanthal, and, being me I wanted more. I wanted parallels.
So, take one 1.5mm drill bit and slowly drill the post holes.
Then, do 4 wraps parallel 0.5, around 2mm.
Then, blow your cock off when you forget the airflow is set to nothing as you forgot to put the top cap on.
I like these.
I like these a lot.
Its hot with the airflow wide open...
The madman strikes once more.
No videos yet, but once I do a better build in it, there will be. This one was purely to see if they fit which they now do