Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Best Coil for Clouds

Discussion in 'Cloud Chasing & Sub Ohming' started by bbf90b, Aug 27, 2014.

  1. bbf90b

    bbf90b Postman

    Joined:
    Apr 25, 2014
    Messages:
    189
    Likes Received:
    12
    What is it?? I want to hear/see the coils that you all have found puts out the most vapor. [:

    Sent from my Prism II using Planet of the Vapes mobile app
     
  2. Premier Ecigs
  3. SublimeSparo

    SublimeSparo Postman

    Joined:
    Jul 9, 2014
    Messages:
    361
    Likes Received:
    52
    so far...
    0.6mm Kanthal 8wraps around 2.5mm drillbit dual coil 0.2 Ohms
     
    #2 SublimeSparo, Aug 27, 2014
    Last edited: Aug 27, 2014
  4. bbf90b

    bbf90b Postman

    Joined:
    Apr 25, 2014
    Messages:
    189
    Likes Received:
    12
    That is similar to what I have in now. 2 26g 7 or 8 wrap parallels.. But something is wrong with them. They take too long to heat up..

    Sent from my Prism II using Planet of the Vapes mobile app
     
  5. Smoorecig
  6. Chegs

    Chegs Veteran

    Joined:
    Sep 15, 2013
    Messages:
    5,923
    Likes Received:
    1,000
    I use 3x0.5mm in parallel round a 4mm drill, which allows me to then thread 4mm voodoo wool through. Think it's 4 wraps gives 0.14 ohms and powered via a 4000 mah lipo pack, heats quickly and chucks clouds.

    posted from a DIY juice cloud
     
  7. IrishHobo

    IrishHobo Postman

    Joined:
    May 20, 2014
    Messages:
    673
    Likes Received:
    151
    Dual coil with twisted 28 gauge in parallel with 0.8 ribbon wire @ 0.16 ohm. Super build.


    Sent from my iPhone using Planet of the Vapes
     
  8. SublimeSparo

    SublimeSparo Postman

    Joined:
    Jul 9, 2014
    Messages:
    361
    Likes Received:
    52
    more, thicker wire will take longer to heat up, you have to prime them up to temp using a standard mech mod... starts pondering about a 100-200W box mod...
     
  9. Tutterz

    Tutterz Postman

    Joined:
    Dec 1, 2013
    Messages:
    559
    Likes Received:
    96
    I'm quite liking flattened twisted .6 running duals, coming out to 0.14 and it's seriously chucking the clouds. The flattened twister wire looks like this and is piss easy to do

    [​IMG]


    The theory behind it is that the grooves will hold extra juice allowing even more to be vaped off, my favourite coils to date, so much I've twisted .4 and flattened that too, running a single coil 6 wraps around 2mm driver comes out to 0.13 and it's crazy at chucking for a single coil
     
    • Like Like x 2
  10. bbf90b

    bbf90b Postman

    Joined:
    Apr 25, 2014
    Messages:
    189
    Likes Received:
    12
    Yeah, I saw that post haha the coil looks a bit strange, but if it works how can I judge?? XD

    Sent from my Prism II using Planet of the Vapes mobile app
     
  11. IrishHobo

    IrishHobo Postman

    Joined:
    May 20, 2014
    Messages:
    673
    Likes Received:
    151
    Care to fill me in on how to do it, looks superb


    Sent from my iPhone using Planet of the Vapes
     
  12. bbf90b

    bbf90b Postman

    Joined:
    Apr 25, 2014
    Messages:
    189
    Likes Received:
    12
    Ok, so a few questions before I try this myself:
    Is that 1 or 2 pieces of wire you twisted??
    And you said make 2 of the coils, correct?? Just want to make sure.
    And also, did you have any problems installing this coil?? My plume veil has decent sized post holes, but they arent wonderful. Do you think it would fit??

    Sent from my Prism II using Planet of the Vapes mobile app
     

Share This Page