Sub-Ohm Warning!

Readers who are building very low ohm coils must be aware of the risks in regards to batteries and inhalation.
Please read THIS POST for more information.

POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

0.8mm kanthal

Discussion in 'Cloud Chasing & Sub Ohming' started by Trungo, May 27, 2014.

  1. Trungo

    Trungo Achiever

    Joined:
    Nov 13, 2013
    Messages:
    1,445
    Likes Received:
    280
    Don't know if anyone other than Raguri, Seedy or gords1001 will be interested but the vape mesh company have started selling 0.8mm kanthal
     
  2. Huggett

    Huggett Legend

    Joined:
    Feb 25, 2014
    Messages:
    14,408
    Likes Received:
    8,532
    They're crazy fookers!

    And I don't mean to sound horrible, but we all know some muppet who doesn't know what they are doing are going to buy it and attempt it.

    *finds himself staring at it* no even im not that much of a muppet

    Sent From Within A Plume Of Vapour...
     
    #2 Huggett, May 27, 2014
    Last edited: May 27, 2014
  3. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,624
    *checks bank account*
    Fuck,
    Who loves me? I need this and an ohm meter xD
     
  4. sparkyjuice

    sparkyjuice Achiever

    Joined:
    Jan 27, 2014
    Messages:
    3,644
    Likes Received:
    701
    ok I'm not a sub-ohmer, that's out the way
    surely lots of coils in parallel over lots of wick area must produce more vapour than 2 big fuck off coils ?
    Or have I missed the point entirely ?
     
  5. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,624
    Yes and no...
    I'm currently running a 0.16 parallel coil, and yes, it performs better than a 0.16 single strand. But, with thicker wire you can get the ohms down much easier, and still keep the same coverage due to the fact that it's thicker xD
    Thicker wire also seems to hold its heat much better, and is less likely to go pop when you dry burn. 0.3 used to pop all the time for me. 0.5 and 0.6 had only popped when I forgot to.lock the button when.building

    So, wrap for.wrap, it's better to be thicker.
     
    • Thank Thank x 1
  6. sparkyjuice

    sparkyjuice Achiever

    Joined:
    Jan 27, 2014
    Messages:
    3,644
    Likes Received:
    701
    so eventually.......

    your terminals look like this ??? ;)
     

    Attached Files:

  7. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,624
  8. sparkyjuice

    sparkyjuice Achiever

    Joined:
    Jan 27, 2014
    Messages:
    3,644
    Likes Received:
    701
    ah, effectively quad coil on 2 wick....got it !
    so its a space issue inside the atty primarily ?
     
  9. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,624
    Yep, really is actually. The double cross just had the same build put in Tim and there's only around 0.00000000001mm between the far left of the coil and the top cap. The igo m, being 22mm, has a lot.more space and.they can.be central
     
  10. sparkyjuice

    sparkyjuice Achiever

    Joined:
    Jan 27, 2014
    Messages:
    3,644
    Likes Received:
    701
    interesting.......muahahaha
     

Share This Page