Freemaxtech
Postman
- Joined
- Sep 11, 2019
- Messages
- 737
Today I will show you some instructions of Freemax Twister Starter Kit, coming with a variable wattage style mod and fireluke 2 tank.
You can use a bottom turn dial to adjust power from 10w to 80w. It comes with a 2300 mAh internal battery, charging the vape mod via the usb port,and it gets a fair bit more life out of the device than similarly powered mods, with around 5 hours usage using the 70w coil inside the tank. 5 clicks of the fire button turns the device on and off.
Battery Life Indicator:
Green – 100%–65%
Yellow – 65% -30%
Red – 30%–0%
Charging Indicator:
Blue (Flashing)–Connected
Red–Charging
No Light–Fully Charged
The Fireluke 2 tank is compatible with the original Fireluke coils:
X1 single-mesh 0.15-ohm coil, rated for 40-90 watts (included)
X2 dual-mesh 0.2-ohm coil, rated for 40-80 watts (included)
X3 triple-mesh 0.15-ohm coil, rated for 50-90 watts (not included)
NX1 single-mesh SS316L 0.15-ohm coil, rated for 400-550 F in TC (not included)
Similar vape pen kit here:Freemax Gemm Review
You can use a bottom turn dial to adjust power from 10w to 80w. It comes with a 2300 mAh internal battery, charging the vape mod via the usb port,and it gets a fair bit more life out of the device than similarly powered mods, with around 5 hours usage using the 70w coil inside the tank. 5 clicks of the fire button turns the device on and off.
Battery Life Indicator:
Green – 100%–65%
Yellow – 65% -30%
Red – 30%–0%
Charging Indicator:
Blue (Flashing)–Connected
Red–Charging
No Light–Fully Charged
The Fireluke 2 tank is compatible with the original Fireluke coils:
X1 single-mesh 0.15-ohm coil, rated for 40-90 watts (included)
X2 dual-mesh 0.2-ohm coil, rated for 40-80 watts (included)
X3 triple-mesh 0.15-ohm coil, rated for 50-90 watts (not included)
NX1 single-mesh SS316L 0.15-ohm coil, rated for 400-550 F in TC (not included)
Similar vape pen kit here:Freemax Gemm Review
