vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
Top for zinc alloy casting, near the location of the Think Vape Finder TC Box Mod screen concave carved Think Vape LOGO, center 510 interface of stainless steel and anti-scrape disc slightly higher than the surrounding, able to scratch the surface, effectively prevent the installation of atomizer and scratch-resistant plate and the radial pattern of laser etching, and after a scratch-resistant plate, there is a circle bumps, about 25 mm in diameter, can have the effect of continues the e-liquids, prevent the e-liquids atomizer or too much oil smoke when oil spill into the 510 interfaces to cause a short-circuit.This product is from vapeciga.
The outer end is the design of a circle of heat sink pattern, which echoes the 510 interface pattern on the top to further enhance the sense of coordination on the appearance. Whether this structure is for improving the heat dissipation ability or just for the appearance level, I am not sure. It is also unknown what effect this particular model can bring, as it has a unique triangular elastic adaptive electrode in the 510 interface.
The shape of the top is a bit like the head of the monster in the movie "aliens", which gives people a ferocious feeling. There is only one slot for opening the battery cover at the bottom. However, the actual experience is not good.
The top heat sink style is well-made, but this model also brings some problems while improving the appearance level. It is easy to accumulate e-liquids and dirt, and it is difficult to clean up. Although it was passivated in the vertical bend, it is still sharp and has the feeling of scraping hands. Main machine paint surface in addition to the bottom of the thin poor scratch resistance has a good wear resistance, and the metal part is completely do not worry about the problem of wear, the use of screwdriver can only leave a slight scratch.
The key panel is made of stainless steel, with a wiredrawing process on the front and a frosted process on the two sides (the right arrow is ultra-micro distance shooting and the fine scratch caused by the author's scraping with metal). The layout of the keys has not changed due to the characteristics of the DNA chip, but the three keys have been designed into a hexagonal shape. The ignition keys are slightly loose, and sometimes there will be a slightly stuck feeling, while the adjustment keys are elastic and comfortable, resilient and powerful, which is very convenient.
And the gap around 510 anti-scratch disc also appears uneven, whether it will cause the leakage of e-liquids?
As for the battery compartment, the cover of the battery compartment is connected with the body with four or two strong magnets, which have a strong suction force. However, some problems also occur in the use of me. For example, the upper left arrow indicates that the strong magnet of the body is drawn out by the magnet on the cover.
In the middle of the cabin printed with the product batch number, the battery positive and negative pole connection point using brass plating silver material internal spring design, reduce the electric loss, elastic force is strong, but because of its travel is short, just the battery negative pole alignment contact, press into the battery, very easy.
The outer end is the design of a circle of heat sink pattern, which echoes the 510 interface pattern on the top to further enhance the sense of coordination on the appearance. Whether this structure is for improving the heat dissipation ability or just for the appearance level, I am not sure. It is also unknown what effect this particular model can bring, as it has a unique triangular elastic adaptive electrode in the 510 interface.
The shape of the top is a bit like the head of the monster in the movie "aliens", which gives people a ferocious feeling. There is only one slot for opening the battery cover at the bottom. However, the actual experience is not good.
The top heat sink style is well-made, but this model also brings some problems while improving the appearance level. It is easy to accumulate e-liquids and dirt, and it is difficult to clean up. Although it was passivated in the vertical bend, it is still sharp and has the feeling of scraping hands. Main machine paint surface in addition to the bottom of the thin poor scratch resistance has a good wear resistance, and the metal part is completely do not worry about the problem of wear, the use of screwdriver can only leave a slight scratch.
The key panel is made of stainless steel, with a wiredrawing process on the front and a frosted process on the two sides (the right arrow is ultra-micro distance shooting and the fine scratch caused by the author's scraping with metal). The layout of the keys has not changed due to the characteristics of the DNA chip, but the three keys have been designed into a hexagonal shape. The ignition keys are slightly loose, and sometimes there will be a slightly stuck feeling, while the adjustment keys are elastic and comfortable, resilient and powerful, which is very convenient.
And the gap around 510 anti-scratch disc also appears uneven, whether it will cause the leakage of e-liquids?
As for the battery compartment, the cover of the battery compartment is connected with the body with four or two strong magnets, which have a strong suction force. However, some problems also occur in the use of me. For example, the upper left arrow indicates that the strong magnet of the body is drawn out by the magnet on the cover.
In the middle of the cabin printed with the product batch number, the battery positive and negative pole connection point using brass plating silver material internal spring design, reduce the electric loss, elastic force is strong, but because of its travel is short, just the battery negative pole alignment contact, press into the battery, very easy.
