vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
There are a lot of "eye-catching" works in the numerous production groups, but not only to achieve affordable and practical and high can be said to be less in and less! And this RDA is one of them!With this early Nixon atomizer, has established a very good reputation in many players! Excellent workmanship and low price make it very popular. Now, this GR1 RDA atomizer has been launched.
Package
Simple small carton packaging, white and black eye-catching collocation, the name of G.R.1 words, with GAS MOD a GAS mask team LOGO!
Take out everything, the accessories are also quite complete, GR1 atomizer, two hexagon wrench with a group post! There are also a lot of aprons and replacement accessories, the following will be introduced!
Atomizer
GR1 RDA adopts the base of 22MM atomizer. Compared with the mainstream 24MM atomizer, the volume of the atomizer is much smaller.
GR1 RDA bottom electrode adopts gold-plated bottom oiling electrode, matching each type with its own code! There is also a screw to replace the electrode and air inlet.
The atomizer uses a short 510 nozzle with chamfering in the nozzle to prevent condensation overflow! Match build on 22MM cover to show a few more mini! The base uses the oxidation sandblasting technology, the particle is very fine!
GR1 RDA base adopts two hexagon screws to fix the heating wire, which belongs to the side air intake structure of the single-engine atomizer, while the interior USES two "pig nose" air intake accessories with an upward tilt of 45 degrees. Oil groove characterization want to be deep, no matter as a drop of oil or the bottom of the oil atomizer have considerable oil storage capacity!
The GR1's intake fitting allows it to be externally side-fed, and when air enters the interior it is transformed into a bottom-fed structure by this "pig nose" fitting!And the accessories also with the thought that a large intake accessories can be used for replacement, with different data to improve the playability of many.
It is also possible to change the gold-plated electrode for dripping oil in the accessories.
GR1 wire is not difficult, as long as the coil is fixed in the card slot and the screw fixed can be completed, but there is a bad thing is that the screw is easier to slide the wire!
One of the features of the GR1 is that it is a nebulizer that turns side inlet into bottom inlet.
Reserve more cotton for deep oil grooves, but be careful not to block the air intakes!
Accessories
Another great feature of the GR1 RDA is its accessories! In fact, you notice when you see the first picture! A nebulizer with formula one car general combination! Available.
https://www.vapeciga.com/products/gas-mods-kree-rta-3-5ml-22mm
Package
Simple small carton packaging, white and black eye-catching collocation, the name of G.R.1 words, with GAS MOD a GAS mask team LOGO!
Take out everything, the accessories are also quite complete, GR1 atomizer, two hexagon wrench with a group post! There are also a lot of aprons and replacement accessories, the following will be introduced!
Atomizer
GR1 RDA adopts the base of 22MM atomizer. Compared with the mainstream 24MM atomizer, the volume of the atomizer is much smaller.
GR1 RDA bottom electrode adopts gold-plated bottom oiling electrode, matching each type with its own code! There is also a screw to replace the electrode and air inlet.
The atomizer uses a short 510 nozzle with chamfering in the nozzle to prevent condensation overflow! Match build on 22MM cover to show a few more mini! The base uses the oxidation sandblasting technology, the particle is very fine!
GR1 RDA base adopts two hexagon screws to fix the heating wire, which belongs to the side air intake structure of the single-engine atomizer, while the interior USES two "pig nose" air intake accessories with an upward tilt of 45 degrees. Oil groove characterization want to be deep, no matter as a drop of oil or the bottom of the oil atomizer have considerable oil storage capacity!
The GR1's intake fitting allows it to be externally side-fed, and when air enters the interior it is transformed into a bottom-fed structure by this "pig nose" fitting!And the accessories also with the thought that a large intake accessories can be used for replacement, with different data to improve the playability of many.
It is also possible to change the gold-plated electrode for dripping oil in the accessories.
GR1 wire is not difficult, as long as the coil is fixed in the card slot and the screw fixed can be completed, but there is a bad thing is that the screw is easier to slide the wire!
One of the features of the GR1 is that it is a nebulizer that turns side inlet into bottom inlet.
Reserve more cotton for deep oil grooves, but be careful not to block the air intakes!
Accessories
Another great feature of the GR1 RDA is its accessories! In fact, you notice when you see the first picture! A nebulizer with formula one car general combination! Available.
https://www.vapeciga.com/products/gas-mods-kree-rta-3-5ml-22mm
