What's new

Steam Crave Aromamizer V2 RDTA:The best vapes 2019

vapeciga.com

Initiate
Joined
Aug 30, 2019
Messages
43
“Steam Crave Aromamizer V2 RDTA” is a high-quality atomizer that is popular among vapers. This time, we will evaluate and review this product.

  • Steam Crave Aromamizer V2 RDTA with both smoke and mouthfeel
  • Special anti-explosion oil dropper
  • The solid material, quite thick glass tube, the round cutting , and the excellent electrolytic material
  • No oil leakage at all

The brand logo Aromamizer V2 RDTA can be seen on the box.


Taking out the manual, you can see that there is a large section to illustrate the comparison with other bottom-intake tanks, partly to explain the advantages of side intake.

Steam_Crave_Aromamizer_V2_RDTA_23mm_3ml3_1800x1800.jpg


Having entirely disassembled the atomizer , the internal structure is not complicated. Whereas, the shape of the drip nozzle and the middle chamber have been distinguished from other atomizers.



Attention needs to paid to the part of the base. As an Steam Crave Aromamizer V2 RDTA, the combination of the oil guide cotton and the oil storage area makes a difference.


It can be seen that the thread connecting between the “small base” of several electrode columns and the “large base” of the actual atomizer is relatively clear.

upload_2019-9-26_18-7-45.png


After screwing, I disassembled the Steam Crave Aromamizer V2 RDTA from vapeciga: There are 4 small holes on the top of the "small base". which is a significant bridge between oil storage and oil guide cotton.


upload_2019-9-26_18-10-1.png


There are screws under the positive column, so I did not try to fine tune. The main reason is that this device has an adaptive spring electrode and there is no corresponding requirement.
upload_2019-9-26_18-12-13.png


Continue to look at the front of the base. Here I took a pointed tweezers into it, you can see that the buried space reserved in the electrode column is not small. As a matter of fact, in terms of hand experience, it is more than sufficient to use the A1 manufacturer's 0.8mm wire.

The screw part can be seen to prevent the heating wire from being broken when the screw is tightened, and the manufacturer has passivated the screw at the end of the screw.

upload_2019-9-26_18-13-39.png
 

Attachments

  • upload_2019-9-26_18-13-13.png
    upload_2019-9-26_18-13-13.png
    822.7 KB · Views: 43
Last edited:
Back
Top Bottom