Doris_2Fdeal
Achiever
- Joined
- Oct 8, 2017
- Messages
- 1,686
DOVPO MVV II 280W APV Box Mod
Features
Zinc alloy + PC construction
Output voltage: 1-8V
Operating voltage: 6.4V-8.4V
Resistance range: 0.08-3.5ohm
Overheat protection
Overtime vaping warning
Battery reversal protection
1.0V to 8.0V voltage range
Maximum 280W power wattage
Powered by dual 18650 batteries (batteries sold separately)
LED indicator to show the battery life
New aesthetic colorful look and stylish designs
510 threading connection
USB Type-C charging port
$19.9 Nikola Antares Vape 1200mAh Pod System Starter Kit
Features
Material: Zinc Alloy
Pod capacity: 2ml
Coil Resistance: 0.7ohm mesh coil (11~25W) / 0.6ohm
Battery Capacity: 1200mAh
Output Voltage: 3.0V / 3.3V / 3.5V
Input voltage: 3.2~4.25V
Standby Current: 0uA
Charging Voltage: 5V
Charging Current: 1A
Resistance Range: 0.5~2.0ohm
Low Voltage warning: 3.2V
Maximum output duration: 7s
Latest unique design with curvy shaping; plus the in-mold extension technology
Equipped with 1200mAh battery, longer battery life
Topside airflow system prevents leaking at the bottom
Adjustable airflow, perfectly switch between MTL and DL
Magnetic structure, easy to pull and plug
1:1 ULTON Gata Style 24mm 2-in-1 MTL&DTL RTA
Features
24mm Diameter
Single coil
Two airflow rings
MTL Airflow Ring
DLH Airflow ring
Postless deck
Half turn top cap
Bottom airflow
$9.9 Authentic VXV Soulmate 24mm RTA
Features
Diameter: 24mm;
Height: 58.5mm;
Gear-top fill cap design makes it easy to refill;
2-piece chimney section allows for easy rebuilding;
Offset 2-posthole design for easy coil installation;
Dual juice well design allows for efficient wicking and leak resistance;
Ultem tank sections gives high-end look and durability;
Adjustable bottom airflow;
Gold plated 510 connector;
Top-fill cap:
Gear top design allows easy removal / installation of top-fill cap.
The gear shape also provides and aesthetically appealing design.
Chimney:
2-piece chimney section allows for easy wicking.
This allows you to screw the lower half of the chimney on, trim your wicks, then replace the top chimney section.
Deck:
Offset post holes allow for easy coil installation.
Low set coil position allows juice to wick faster and reach the coils faster.
Coil position also allows the coils to sit closer to the airflow and maximizes flavor.
Juice-well:
3 triangular vertices of the juice-well are subtly visible at the base of the RTA.
The 3 vertices will use negative pressure to feed the juice-well, so it will not leak when sitting.
Vertices are cut on the bottom of the base to ensure that all juice in the tank can be vaporized.
Circular secondary juice-well between the chamber and the base ensures that juice will be evenly distributed to your cotton.
Tank:
2 separate pieces of ultem and 1 piece of stainless steel.
Ultem provides high-end aesthetics and resistance to cracking or damage if dropped.
3-piece tank section allows you to control the direction that your logo faces, to line up with your mod
Features
Zinc alloy + PC construction
Output voltage: 1-8V
Operating voltage: 6.4V-8.4V
Resistance range: 0.08-3.5ohm
Overheat protection
Overtime vaping warning
Battery reversal protection
1.0V to 8.0V voltage range
Maximum 280W power wattage
Powered by dual 18650 batteries (batteries sold separately)
LED indicator to show the battery life
New aesthetic colorful look and stylish designs
510 threading connection
USB Type-C charging port
$19.9 Nikola Antares Vape 1200mAh Pod System Starter Kit
Features
Material: Zinc Alloy
Pod capacity: 2ml
Coil Resistance: 0.7ohm mesh coil (11~25W) / 0.6ohm
Battery Capacity: 1200mAh
Output Voltage: 3.0V / 3.3V / 3.5V
Input voltage: 3.2~4.25V
Standby Current: 0uA
Charging Voltage: 5V
Charging Current: 1A
Resistance Range: 0.5~2.0ohm
Low Voltage warning: 3.2V
Maximum output duration: 7s
Latest unique design with curvy shaping; plus the in-mold extension technology
Equipped with 1200mAh battery, longer battery life
Topside airflow system prevents leaking at the bottom
Adjustable airflow, perfectly switch between MTL and DL
Magnetic structure, easy to pull and plug
1:1 ULTON Gata Style 24mm 2-in-1 MTL&DTL RTA
Features
24mm Diameter
Single coil
Two airflow rings
MTL Airflow Ring
DLH Airflow ring
Postless deck
Half turn top cap
Bottom airflow
$9.9 Authentic VXV Soulmate 24mm RTA
Features
Diameter: 24mm;
Height: 58.5mm;
Gear-top fill cap design makes it easy to refill;
2-piece chimney section allows for easy rebuilding;
Offset 2-posthole design for easy coil installation;
Dual juice well design allows for efficient wicking and leak resistance;
Ultem tank sections gives high-end look and durability;
Adjustable bottom airflow;
Gold plated 510 connector;
Top-fill cap:
Gear top design allows easy removal / installation of top-fill cap.
The gear shape also provides and aesthetically appealing design.
Chimney:
2-piece chimney section allows for easy wicking.
This allows you to screw the lower half of the chimney on, trim your wicks, then replace the top chimney section.
Deck:
Offset post holes allow for easy coil installation.
Low set coil position allows juice to wick faster and reach the coils faster.
Coil position also allows the coils to sit closer to the airflow and maximizes flavor.
Juice-well:
3 triangular vertices of the juice-well are subtly visible at the base of the RTA.
The 3 vertices will use negative pressure to feed the juice-well, so it will not leak when sitting.
Vertices are cut on the bottom of the base to ensure that all juice in the tank can be vaporized.
Circular secondary juice-well between the chamber and the base ensures that juice will be evenly distributed to your cotton.
Tank:
2 separate pieces of ultem and 1 piece of stainless steel.
Ultem provides high-end aesthetics and resistance to cracking or damage if dropped.
3-piece tank section allows you to control the direction that your logo faces, to line up with your mod
