What's new

Review WOTOFO RECURVE RDA....review

joe clay

Veteran
Joined
Apr 19, 2014
Messages
9,277
I was kindly contacted by @Healthcabin asking if i would mind reviewing the WOTOFO RECURVE RDA, which i agreed to do.
Now this review is in no way influenced by @Healthcabin or wotofo in anyway and this review is my own findings and thoughts of this rda.

Mod used: vgod elite pro mech mod and pico squeeze squonker.

1st thoughts on packaging is very good with a snazzy printing on the box with a clear window of the rda inside, getting the rda out of the foam packing was fine but getting the driptip and 510 driptip adapter out was a bugger of a job but i did it but nearly destroying the package in the process.

The rda is 24mm and to look at at 1st as it has a waist a bit like Marilyn Monroe, now it did come with extra 810 driptip that also has a waist to it to with a nice curve ( all this marilyn and curves is getting me a semi here) right now just concentrate on the RDA and get marilyn out of my head, i like the 810 driptip as its black and silver swirls and just seems to click into place nicely.
I fitted the 510 pin instead of the bf pin and its got a real nice protruding 510 pin which is good to see for safety purposes for you mech users.
In the box is 3x comp wire bags but only one has coils inside the other 2x have cotton in one and spare screws and 'O' rings in the other, but please WOTOFO stop putting comp wire on all 3x bags if only one has them.

Removing the base of the recurve exposes a sort of half pipe where your SINGLE coil yes its a single coil rda sits in with the fixing screws on the sides, now it has 6 holes on each side that are aimed downwards towards the base so the airflow comes in just underneath the coil, now the coil i used was one of the coils that was included in the box which once i had cut down and wicked and juiced it come in @0:18 ohms.... now the tank just slips on but BUT it does turn about a quarter and thats for your airflow "open" or "restricted" but to be honest it made no difference imo as with the air holes all lined up there was still a slight air restriction, but the flavour i'm is very very good but for cloud chasing, NO, now hold on i'm not saying theres no clouds because there is, this rda imo is made for flavour more than for clouds.

Now i have it sat on a mech mod and i'm forever adding juice because the juice well is not much so if you over drip then you end up with juice in your mouth or if like me you give a little blow before you inhale then juice gets shot out the airholes.
But i got to admit it does look sexy on the vgod mech mod.

Time to squonk it now.
I changed the 510 over to the bf pin (was fitted as new in box) then screwed down onto the pico squeeze squonk mod and that is where this RDA feels at home as when you squeeze for more juice the excess is taken down back into the bottle, but if you do over squonk then you will get juice going through the airholes, having said that its a great little rda thats given great flavour and good clouds.

You can find the WOTOFO RECURVE RDA
At

https://www.healthcabin.net/



20180505_173116.jpeg
20180505_173419.jpeg
20180505_173455.jpeg
20180505_173945.jpeg
20180505_175607.jpeg
20180505_180107.jpeg
 
Last edited:
Good stuff Joe. Where would you say it sat in relation to other single coil rdas for flavour?
 
Great review mate, this has been on my radar since it was announced, but I've been preoccupied hunting for a new car since last week. Sounds right up my street, I just have to remember not to purge before inhaling :) Looking forward to giving this a blast mate, thanks a lot.
 
Great review @joe clay and great little rda and cheap, it was the one thing I wasn't leaving expo without, I was going to pre order this but then thought I'd wait for Expo and glad I did coz it was only £22 and I got to have a chat with Mike.
You didn't mention I the little Alan key shaped coiling jig that comes with it, you get a 3mm and 2.5mm key to use to hold your coil bit what's clever is you use it to cut the perfect size on the coil legs, so no more messing about taking your coil in and out to get the right length like you usually end up doing with a postless deck . Simply push the coil to the and cut the leg for the perfect size.
PicsArt_05-11-10.32.19.jpeg
 
Back
Top Bottom