Shetland Sam
Achiever
- Joined
- Mar 10, 2017
- Messages
- 4,821
Alright guys we are back again with a hardware review.
This kit was sent out for the purpose of this review. All opinions expressed here are those of my own and no one else's.
So I bring to you the Cut 220 kit.
So as always we will take a look at the kit contents, then a brief look at the tank and mod before I give sone pros and cons and some final thoughts.
Kit contents
Cut 220 mod
Bulldog tank
0.18 ohm mesh coil fitted
0.20 triple coil
3ml straight glass
Usb cable
Spare o rings
And all the bits of paper no one looks at.
Bulldog tank.
The tank comes fitted with a 4.3ml bubble glass. It has top slide and fill. And bottom adjustable airflow. It comes with the mesh coil fitted. Using that coil at 80w you get great flavour and cloud production. Switch it over to the 0.20 ohm triple coil and at 100w you get even more clouds but not as much flavour as the mesh coil. I've had no issues with leaking. The mesh coil was still going strong but I have switched to the triple coil for the review.
The Cut 220 mod
This is a dual 18650 mod with a max power of 220w.
Wattage range 5-220w
Resistance range is 0.08-3.0ohm
1.3 inch TFT screen
Various temp control mods along with novice mode VW mode and bypass mode.
In novice mode it presets the wattage for you. In VW mode you set your wattage.
3 clicks gets you into the settings using the + and - to navigate through the menus.
5 clicks on and off.
Press + and - locks the wattage.
Removable back plate to get access to your batteries. It has absolutely no rattle although it is a bit of a finger print magnet. The shape of the mod is fantastic. Fits really nice in the hand and depending how you hold the mod you can thumb or finger fire.
Pros.
Both mod and tank has performed faultlessly.
Nice shape/fits in the hand nicely
No rattle on the battery cover.
Super simple menu.
Great flavour from the mesh coil
Cons
Getting some paint chips where it has been in my bag.
The battery door is a finger print magnet
Can't find a link on where to purchase this from just now.
This kit was sent out for the purpose of this review. All opinions expressed here are those of my own and no one else's.
So I bring to you the Cut 220 kit.
So as always we will take a look at the kit contents, then a brief look at the tank and mod before I give sone pros and cons and some final thoughts.
Kit contents
Cut 220 mod
Bulldog tank
0.18 ohm mesh coil fitted
0.20 triple coil
3ml straight glass
Usb cable
Spare o rings
And all the bits of paper no one looks at.
Bulldog tank.
The tank comes fitted with a 4.3ml bubble glass. It has top slide and fill. And bottom adjustable airflow. It comes with the mesh coil fitted. Using that coil at 80w you get great flavour and cloud production. Switch it over to the 0.20 ohm triple coil and at 100w you get even more clouds but not as much flavour as the mesh coil. I've had no issues with leaking. The mesh coil was still going strong but I have switched to the triple coil for the review.
The Cut 220 mod
This is a dual 18650 mod with a max power of 220w.
Wattage range 5-220w
Resistance range is 0.08-3.0ohm
1.3 inch TFT screen
Various temp control mods along with novice mode VW mode and bypass mode.
In novice mode it presets the wattage for you. In VW mode you set your wattage.
3 clicks gets you into the settings using the + and - to navigate through the menus.
5 clicks on and off.
Press + and - locks the wattage.
Removable back plate to get access to your batteries. It has absolutely no rattle although it is a bit of a finger print magnet. The shape of the mod is fantastic. Fits really nice in the hand and depending how you hold the mod you can thumb or finger fire.
Pros.
Both mod and tank has performed faultlessly.
Nice shape/fits in the hand nicely
No rattle on the battery cover.
Super simple menu.
Great flavour from the mesh coil
Cons
Getting some paint chips where it has been in my bag.
The battery door is a finger print magnet
Can't find a link on where to purchase this from just now.