Review Kayfun from Vape Geek :)

[KulrMeStoopid]

Air control

Aha! thank you my dear! My Nerm has AFC too so I wont be needing to mess about with it

 

[Grizzly Adams]

As you look at it AFC,Air inlet,filling hole but you needle a needle type refill bottle or syringe with a widish needle

 

[KulrMeStoopid]

As you look at it AFC,Air inlet,filling hole but you needle a needle type refill bottle or syringe with a widish needle

Ah!!! Ok! I get it now... so you just stick a needle in there and fill er up?


Ill jut take the top off

 

[Grizzly Adams]

Ah!!! Ok! I get it now... so you just stick a needle in there and fill er up?


Ill jut take the top off

Thats what I think most of us do, have heard of it not reseating properly then the obvious leaks

 

[Tubbyengineer]

You've got 3 holes on it, one with the screw air flow control - be careful with it if it gets in too far it can get stuck, you can get replacement M3x5 grub screws on Ebay or from Modelbearings on the net, second angled one is the air inlet, if you get a dry hit, try blocking it with a finger and giving a sharp draw, if the dry hits go away you've probably got wick blocking the little juice channels, wick should just reach the juice deck and not cover the little slots at the edge. 3 3rd hole is the fill port and you fill it with one of these...http://www.cloud9vaping.co.uk/epage...bjectPath=/Shops/yxve46fvrnud/Products/B70-85, poke the point into the little centre hole, press gently then squeeze the bottle (with the atty upside down) juice goes in- stop when just a little air bubble left, job done...

 

[Tubbyengineer]

Arghhh, no needles, that's why they don't reseat properly and leak...