I must say i've never been happier with a Fasttech clone, this one is simply flawless. It's listed on FT as 4Nine V2 style but we all know it's a Tarsius Prime
https://www.fasttech.com/p/1920900
Firstly a breakdown.
Box: Nicely presented and all the parts look immaculate, i believe that's the female logo on the box? Tarsius customs have this weird male/female thing going on.
Switch is bloody nice, luxurious i'd say, the Delrin insulator can be adjusted for battery rattle, it has to be said there aren't many thready for the insulator though so could fail after time, not a problem if you're buying a cheap ass clone such as this, more worrisome on a genuine though.
Now this is how i'd prefer my mods, 1 single tube in sections instead of 3 different tubes for 18350/500/650, and also the adaptors are seamless, can feel a slight seem when running your fingers accross them but to look at it, you'd think it was all one piece.
Switch looks almost seamless, but i think we can forgive it for that being a clone, also has about a 2mm throw, but the throw is pretty smooth straight out of the box, graphite pencil trick was only marginally better, i've never had a better switch on a clone if i'm honest. Locking ring is reverse threaded.
Top cap has a nice Delrin insulator so perfect for flat top batteries, only thing i'll say though is if your 510 centre pin is very short and non-adjustable you may have trouble making decent contact with the battery.
And here it is built up, Currently using it in 18350 mode with a Doge clone for when i fancy a few moderate clouds, this mod hits like a train!
5/5 from me for this mod, if you must have a nice and simple / attractive looking 22mm mod then this is for you
*EDIT* I've discovered further in the thread that this is indeed 20x1 threaded, except for the switch, which means no paps switch upgrade but you CAN use a hybrid adaptor like the following...
$5.55 M20x1 Hybrid 510 Adapter for Mechanical Mods (3-Pack) 3-pack - brass + copper + stainless steel at FastTech - Worldwide Free Shipping
Unfortunately the threads aren't long enough to accomodate the Heron in hybrid mode, leaves a 1.5mm gap
It may accomodate the Aqua V2 in hybrid mode, i'll find out shortly as mine is on the way from China
https://www.fasttech.com/p/1920900
Firstly a breakdown.
Box: Nicely presented and all the parts look immaculate, i believe that's the female logo on the box? Tarsius customs have this weird male/female thing going on.
Switch is bloody nice, luxurious i'd say, the Delrin insulator can be adjusted for battery rattle, it has to be said there aren't many thready for the insulator though so could fail after time, not a problem if you're buying a cheap ass clone such as this, more worrisome on a genuine though.
Now this is how i'd prefer my mods, 1 single tube in sections instead of 3 different tubes for 18350/500/650, and also the adaptors are seamless, can feel a slight seem when running your fingers accross them but to look at it, you'd think it was all one piece.
Switch looks almost seamless, but i think we can forgive it for that being a clone, also has about a 2mm throw, but the throw is pretty smooth straight out of the box, graphite pencil trick was only marginally better, i've never had a better switch on a clone if i'm honest. Locking ring is reverse threaded.
Top cap has a nice Delrin insulator so perfect for flat top batteries, only thing i'll say though is if your 510 centre pin is very short and non-adjustable you may have trouble making decent contact with the battery.
And here it is built up, Currently using it in 18350 mode with a Doge clone for when i fancy a few moderate clouds, this mod hits like a train!
5/5 from me for this mod, if you must have a nice and simple / attractive looking 22mm mod then this is for you
*EDIT* I've discovered further in the thread that this is indeed 20x1 threaded, except for the switch, which means no paps switch upgrade but you CAN use a hybrid adaptor like the following...
$5.55 M20x1 Hybrid 510 Adapter for Mechanical Mods (3-Pack) 3-pack - brass + copper + stainless steel at FastTech - Worldwide Free Shipping
Unfortunately the threads aren't long enough to accomodate the Heron in hybrid mode, leaves a 1.5mm gap
It may accomodate the Aqua V2 in hybrid mode, i'll find out shortly as mine is on the way from China
Last edited: