Chi Megan Problems

[Greebs]

Can it measure the output of the battery? Most ohm meters measure atomizer resistance, you need a voltmeter to measure battery output.

If it's 4.2ish you know the battery is charged...

This is an ohms meter where I can screw the atty on to or test the battery power. It's a vaping outlaws one

 

[Mr.Motivapr]

This is an ohms meter where I can screw the atty on to or test the battery power. It's a vaping outlaws one

Test your battery then mate, if it's measuring around 4.2 then it's charged and the mod is the issue...

 

[Mr.Motivapr]

This is an ohms meter where I can screw the atty on to or test the battery power. It's a vaping outlaws one

Also when it's all assembled is everything snug? No battery rattle etc?

 

[Greebs]

Also when it's all assembled is everything snug? No battery rattle etc?

Battery is firing fine in the mod and no battery rattle when assembled

 

[Greebs]

If it helps at all. When it does fire, the dripper is getting really hot

 

[Mr.Motivapr]

Battery is firing fine in the mod and no battery rattle when assembled

The battery is firing fine?
I thought it wasn't or am I missing something lol?

Or is it fixed after cleaning the bottom??

 

[Greebs]

The battery is firing fine?
I thought it wasn't or am I missing something lol?

Or is it fixed after cleaning the bottom??

It might not be the mod after testing the battery a couple of times inside the mod on the meter it reads 4.01V everytime I fire it

 

[Mr.Motivapr]

If it helps at all. When it does fire, the dripper is getting really hot

So very little vapour production but very hot? Sounds like a short mate.

But you say the atty is measuring 0.4? Therefore no short, very odd!

 

[Greebs]

So very little vapour production but very hot? Sounds like a short mate.

But you say the atty is measuring 0.4? Therefore no short, very odd!

Just tested the dripper and it's now reading 1.01 ohms so that may be the problem as it was reading .4

 

[Mr.Motivapr]

It might not be the mod after testing the battery a couple of times inside the mod on the meter it reads 4.01V everytime I fire it

So that means battery is pretty well charged.

Is the coil glowing as normal?

Legs not glowing etc?