What's new

SS Mesh ? Who knows about that stuff then ?

I still have a soft spot for my little aga-a, it's a great little gennie. I use stealthvapes 400 mesh and it handles everything well. The way I do it is to make a coil and fix it in place, fire it a few times to set it. Then roll the wick and thread it through the coil. Then just pulse the button. It can take a little while to oxidise but you know when it is done as it will glow evenly with no hotspots. I found this method works much better than preoxidising the wick as it seems to sort the hotspots out as it goes.

+1 on that works perfect everytime
 
Thanks for the advise on this folks. The mesh arrived & well, basically i got the device vaping first time. The wick is loose in the coil (Micro) but not bad for a first time & yes, it needs tipping every 3 or 4 toots, dunno if that's normal or not but hey ho ! I tucked a bit of cotton wool behind the coil for good measure.
 
Thanks for the advise on this folks. The mesh arrived & well, basically i got the device vaping first time. The wick is loose in the coil (Micro) but not bad for a first time & yes, it needs tipping every 3 or 4 toots, dunno if that's normal or not but hey ho ! I tucked a bit of cotton wool behind the coil for good measure.

Sounds normal to me for none rope wicking, been ill as fuck last couple of days still am hence no posts/spam from me till this one, anyhoo let me know the mm of the wick holes and the mm from top of centrepost to base of tank (inside) and I'll chop some SS and post it when I can be arsed next day or so was an ill sweaty mess posting stuff today not doing that tomorrow :)

Just for another build to fiddle with rope is where it is at if you ask me, not that that means much in its own right.

Got 1.5mm and 2mm

ps not tried micros myself just kanthal wrapped round a already insitu wick.
 
Last edited:
Sounds normal to me for none rope wicking, been ill as fuck last couple of days still am hence no posts/spam from me till this one, anyhoo let me know the mm of the wick holes and the mm from top of centrepost to base of tank (inside) and I'll chop some SS and post it when I can be arsed next day or so was an ill sweaty mess posting stuff today not doing that tomorrow :)

Just for another build to fiddle with rope is where it is at if you ask me, not that that means much in its own right.

Got 1.5mm and 2mm

ps not tried micros myself just kanthal wrapped round a already insitu wick.


I've seen a guy make a micro coil in a dripper, single coil & then put a short length of mesh in the coil & just pack cotton around the drip well. I can't make sense of that but it's good to have different materials around to try stuff out.
Cheers for the offer man, i reckon they're 1.5mm wick holes, wicks around 35mm long (Guess) & i'm just using a single & leaving the other open for air intake. It could be a mean little atty & i've drilled the air hole out to 2mm, a 1.25ohm micro coil for now, could be better a bit hotter though. I just wish the o rings would hold the cap on, tried some bigger ones but they're too big, might have to get some ptfe under 'em.

Edit... Reading that back to myself reminds me of a conversation about a paper bag ! Life's full of exitement. :lol1:
 
Last edited:
I've seen a guy make a micro coil in a dripper, single coil & then put a short length of mesh in the coil & just pack cotton around the drip well. I can't make sense of that but it's good to have different materials around to try stuff out.
Cheers for the offer man, i reckon they're 1.5mm wick holes, wicks around 35mm long (Guess) & i'm just using a single & leaving the other open for air intake. It could be a mean little atty & i've drilled the air hole out to 2mm, a 1.25ohm micro coil for now, could be better a bit hotter though. I just wish the o rings would hold the cap on, tried some bigger ones but they're too big, might have to get some ptfe under 'em.

Aye seen that vid too I think, this one got my attention to try micros but with rope in the mix havent yet but I just think the video is cool regarless how sad is that, I am ill thats my excuse for liking video based on the cool factor, check to see if 35mm will go in withouth touching the base as there a tard to cut and even more of a tard to cut once there already short n shoot me a pm with addy will post two pre-cut to try like I say wont be tomorrow bud.

Nowt like a good fiddle and sounds like your having a good fiddle :



EDIT you wont find a fucking shop like that in toon, wish I had some money to open one.


Ohhhh jacking off :)
 
Last edited by a moderator:
Pointless post my hand now genies are funking cool rope is cool and va krakens are even more cool :) this thread needed more vape pics
DSC_02802.jpg


Sent from my C6903 using Planet of the Vapes mobile app
 
Some use mesh tube within a mesh tube reckons it wicks better


Sent from (who cares) using Planet of the Vapes
 
Some use mesh tube within a mesh tube reckons it wicks better


Sent from (who cares) using Planet of the Vapes


That's awesome ! Imagine a third mesh tube within it, that would be like the ultimate. A triple mesh of mesh. :grin2:
 
Here's one of my scud mod which has nothing to do with this thread. :spam:


Vamp-Claw-Scud.jpg

i cant contribute without including pointless SPAM its embedded in me I whore pics at every oportunity its a Bobby weakness, vape life, vape porn whatever we need pics all the time :)

ps kewl pic :D
 
Back
Top Bottom