What's new

dna40 / modmaker small boy enclosure

GoWo

Stand Maker
Joined
Dec 28, 2020
Messages
495
I picked up a dna40 on offer last year from SV and a modmaker small boy enclosure , then got stuck in the design stage , then did'nt have time to spend on it for months , anywho picked up where I left off and almost ready to plug my soldering iron in now.
 

Attachments

  • PXL_20220617_101228920.jpg
    PXL_20220617_101228920.jpg
    981.3 KB · Views: 144
  • Modmaker_smallboy mod v39.jpg
    Modmaker_smallboy mod v39.jpg
    136.6 KB · Views: 143
  • Modmaker_smallboy mod v39.jpg
    Modmaker_smallboy mod v39.jpg
    78.4 KB · Views: 144
got the screen tray size sorted and done a dry fit to the board , next is the inside cover with a cut out for the screen & buttons , going to use these clicky tactile switches for up/down/fire
 

Attachments

  • PXL_20220617_180825560.jpg
    PXL_20220617_180825560.jpg
    2.4 MB · Views: 130
  • PXL_20220617_183207410.jpg
    PXL_20220617_183207410.jpg
    2.5 MB · Views: 127
got the screen tray size sorted and done a dry fit to the board , next is the inside cover with a cut out for the screen & buttons , going to use these clicky tactile switches for up/down/fire

Looking good :2thumbsup:
 
wire & tac buttons arrived from modmaker yesterday , need to cut the inner cover on the cnc & solder everything up.
Hopefully it will resemble the render
 

Attachments

  • f0c32cd5-f301-4ea0-bd46-705d0e8ffe3d.JPEG
    f0c32cd5-f301-4ea0-bd46-705d0e8ffe3d.JPEG
    54.7 KB · Views: 129
Drilled 510 & fire button holes , got mixed up and made a rookie mistake , I marked up & drilled the fire button on the wrong side , lol , anyway , that aside I've cut a test inner cover in clear acrylic , just so I can see stuff aligns.
I'm full of a cold so slow progress , I was supposed to be using black abs sheet for the inner cover , but quite like the clear . anyway heres a few pics , going to leave soldering till tomorrow hopefully my eyes and nose will stop running.
 

Attachments

  • PXL_20220622_121415834.jpg
    PXL_20220622_121415834.jpg
    520 KB · Views: 111
  • PXL_20220622_121434266.jpg
    PXL_20220622_121434266.jpg
    502.8 KB · Views: 112
  • PXL_20220622_121441549.jpg
    PXL_20220622_121441549.jpg
    423.1 KB · Views: 110
  • PXL_20220622_122025476.jpg
    PXL_20220622_122025476.jpg
    460.8 KB · Views: 116
some progress this avo , its feckin tight though , & there's me thinking I had loads of room
 

Attachments

  • PXL_20220627_123857051.jpg
    PXL_20220627_123857051.jpg
    960.9 KB · Views: 106
  • PXL_20220627_125218670.jpg
    PXL_20220627_125218670.jpg
    799.9 KB · Views: 104
  • PXL_20220627_151932566.jpg
    PXL_20220627_151932566.jpg
    1 MB · Views: 102
  • PXL_20220627_153926230.jpg
    PXL_20220627_153926230.jpg
    1.3 MB · Views: 101
these are the parts that didn't make it , either because they were superseded or failed
 

Attachments

  • PXL_20220627_165914230.jpg
    PXL_20220627_165914230.jpg
    1.5 MB · Views: 102
Back
Top Bottom