What's new

3d printed squonker

shale84

Postman
Joined
Sep 8, 2016
Messages
910
It's not as some pro made mods but it's not bad either,transfered squonk 510 from geekvape Athena that I had,until I see will I like it,then I might go for 22mm 510 and proper bottle

IMG_20190217_145227.jpg
IMG_20190217_145215.jpg
IMG_20190216_212152.jpg
 
creality 3 ender in the back ? How you finding it supposed to be quite good out of the box
 
creality 3 ender in the back ? How you finding it supposed to be quite good out of the box

It seems quite good out of the box according to facebook group members,It's my 4th printer and I did some upgrades straight away like Duet wifi board and Titan Aero so I can't really tell
 
Nice I have been looking at Duet, and getting a BMG dual drive extruder.

Currently running MKS Gen 1.4, TMC 2100's, Bulldog Style extruder. Just putting the dual extruder together all fitted just need to play about with it.
 
V2
This one I printed in ABS and sanded/polished by hand,it seems that ABS is much easier to sand than PLA,buttons are supposed to be glow in the dark material but it seems that I bought bad one as it's not glowing.
Anyway it's nice and enjoyable to make your own mod even it's not my design,I wish I have more tools/space/money to make mods from wood or stabwood.

IMG_20190316_134809__01.jpg
IMG_20190316_134815__01.jpg
IMG_20190316_134829__01.jpg
IMG_20190316_134844.jpg
 
Have a word with @Lee . He does glow in the dark tips. He could make up buttons if the blanks big enough. Nice finish on the mod, almost Delrin smooth. Good job :2thumbsup:
 
V2
This one I printed in ABS and sanded/polished by hand,it seems that ABS is much easier to sand than PLA,buttons are supposed to be glow in the dark material but it seems that I bought bad one as it's not glowing.
Anyway it's nice and enjoyable to make your own mod even it's not my design,I wish I have more tools/space/money to make mods from wood or stabwood.

View attachment 187645 View attachment 187646 View attachment 187647 View attachment 187648
So much better than first one !
If you wouldn’t mind
But what chip do you use and how much does it cost you to print it?
 
So much better than first one !
If you wouldn’t mind
But what chip do you use and how much does it cost you to print it?

I used DNA75 board from some old mod I had,510 connector is around £5,bottle a few £,Filament few £ as well and some selection of sand papers,polish paste etc,
 
V2
This one I printed in ABS and sanded/polished by hand,it seems that ABS is much easier to sand than PLA,buttons are supposed to be glow in the dark material but it seems that I bought bad one as it's not glowing.
Anyway it's nice and enjoyable to make your own mod even it's not my design,I wish I have more tools/space/money to make mods from wood or stabwood.

View attachment 187645 View attachment 187646 View attachment 187647 View attachment 187648

Looks good mate well done.
 
Back
Top Bottom