Clapton Wire for Limitless RDTA??

[krish123]

Hi,

recently got the limitless RDTA and very happy with it, it came with 2 Clapton coils ohming out at around 0.3Ohms.

I used them in single coil config and enjoyed it.

I now want to buy my own Clapton wire as I have run out of the ones supplied with the tank.

What Guage wire do I need for a 0.3-0.4 ohm single coil build?

Also If I were to dual coil at that ohm range what guage wire would I need then?

To be clear I don't want to make my own Clapton wire just prebuilt stuff that I can wrap and put into the tank.

Cheers,

 

[Dank vape]

26gx30g i use i get around .45 at 5 wrap with duel coil

 

[Gothictwist]

Right now i have http://www.wireandstuff.co.uk/produ...ire---5-Metre-Spool---3.5-Ohms-m.html#SID=111 running in my Origional limitless rdta and running their regular unclaptoned .65 "about 22 awg i think" 317l ss wire in my classic edition both give a great vape.

 

[krish123]

Thanks for the replies guys.

Using the steam engine calc I think 24g wire will be best for me, I can single coil and doil coil with that wire.

Also is it best to go with kanthal Clapton wire or other material?

any good shops you recommend where I can find what im after?

 

[Gothictwist]

Unless your using a regulated Mod that can dump loads of power into it id stay away from kanthal. I find it takes to long to ramp up otherwise especially on the mech, My preference is 317 or 316 SS