Moley
Achiever
- Joined
- Dec 10, 2014
- Messages
- 3,442
Will try that next time,Tried going opposite way with ur negative lead mate? Keep it as short as you can,pop a pic up next build before you fire it up
After I find it in the garden
Will try that next time,Tried going opposite way with ur negative lead mate? Keep it as short as you can,pop a pic up next build before you fire it up
I have a Nextiny and mesh, and watched a million videos and asked and heeded advice, but I cannot get a build in it!!!
I get a hot lower leg and then it burns out/snaps.
Even at tiny wattage pulses.
I'm a competent coil builder and I'm stumped.
Unless the clone atty is somehow faulty it's me at fault, and I don't know why?!
Will try that next time,
After I find it in the garden
Initially yes as the tube mech was easy to roll the coil, but used reg mod tooI know you prob know this but are you using a mech to pulse?
For me, there are a number of factors that interested me in genny's.
As a flavour fiend, I'm curious to see how much better the flavour can be from a genny and mesh.
The lazy builder in me likes the idea of having a build that lasts ages, and needs very little maintenance after installation.
And finally, I just fancy the challenge of mastering one o these wee devils So much so, I've just ordered an In'AX MKIII.
Would never have thought I'd get this deep down the rabbit hole when I took those first baby steps into rebuildables
What's the ohms? Try upping the wattage. Mesh improves with useView attachment 88383hurrah!! At last, didn't do a thing different apart from using a different gauge of mesh?! Trying 300 before but this was a freebie Stealthvape offcut of Unknown gauge, was nowhere near as stiff.
So far I'm not getting the flavour, although it's much cleaner.
Id expect at least 2 tanks through begore it starts singing budView attachment 88383hurrah!! At last, didn't do a thing different apart from using a different gauge of mesh?! Trying 300 before but this was a freebie Stealthvape offcut of Unknown gauge, was nowhere near as stiff.
So far I'm not getting the flavour, although it's much cleaner.
28awg at .88ohm running at 15w now and betterWhat's the ohms? Try upping the wattage. Mesh improves with use