0.2ohm coil for Innokin Coolfire Mini Slipstream

[Frostie]

Morning All,

Looking at new coils for my Innokin Coolfire Mini with Slipstream Tank.

Do the iSub coils fit, or are they only for iSub tanks?

Currently all I can find only are the 0.5 or 0.8 coils but I'd like to try dropping down to 0.2ohm. Seems odd that the Coolfire can fire down to 0.2ohm but I can't find any suitable coils?!?!

Thanks in advance

 

[Furkz]

Those iSub coils are a lot longer. Best to get a different tank and use that with a lower ohm coil. As good as the slipstream tank is, you do start seeing it struggle and higher watts and lower ohms.

You could run something like a Vaporesso NRG or a crown mini tank. But the mod might start struggling or battery dying fast with the high watts

 

[Frostie]

Cheers Furkz.

Yeah looks as though I'll need a different tank to match a lower resistance coil.

Was considering another tank with 4ml capacity anyway... That way I won't have to muck about refilling as often!

 

[Furkz]

Cheers Furkz.

Yeah looks as though I'll need a different tank to match a lower resistance coil.

Was considering another tank with 4ml capacity anyway... That way I won't have to muck about refilling as often!

Haha you'll need a bigger tank. My Vaporesso at 55w needs refilling every 10 mins FFS

 

[Leni]

If you want to try a tank with lower ohm coils, you'd be better off getting a whole new mod. There is a reason they don't make coils that low for it - it's only a 40w mod with small battery capacity. If you run it at 40w you're not going to get a decent vape for more than about 10 mins before the battery starts to drop off.