What's new

Just tried making my own coils

Owen34

Initiate
Joined
Oct 12, 2016
Messages
45
Like the title says. I used 24ga put it on my drag & its reading 40w. I normally vape at 80w what size wire will i need for that?
 
You're never going to get a normal single coil to vape at 80 watts. You'd need something huge.

What RTA are you using? You'll need a dual coil for that.
 
I'm guessing you're using Kanthal - you'll need to change to SS or N80 to hit 80 watts.
 
Like the title says. I used 24ga put it on my drag & its reading 40w. I normally vape at 80w what size wire will i need for that?

If you prefer kanthal I normally do you could use fuse claptons 26 AWG 2 x core and a 32 or 34 AWG wrap.

About 5 wraps (0.4 ohms roughly) on a single coil setup 45-60w for me and on a dual build 50-80w.

They are fairly easy to do but what is very important is quality swivels

 
Alternatively you could try some pre built coils to see what works for you. Geekvape do a few and can’t think of another brand at moment (well my brain lasted long this morning)
 
Try some Brochrome wire (24ga) from StealthVape. 5 or 6 wraps, dual coil should do the job.
 
Back
Top Bottom