What Makes Profile RDA Different With Other Mesh RDA’s?

[WotofoOfficial]

When we went to work on the mesh style atomizer, we wanted to do something different.

​

We know that several companies have tried mesh atomizer in the past with varying degrees of success when it comes to rebuildable atomizers. We wanted to take that idea and run with it.

So we designed Profile RDA! Here you will know why Rip Tripper called it " The Game Changer"!

​

 

[WotofoOfficial]

1. Pre-cut Mesh Style Coil

The first thing that distinguishes the Wotofo Profile from all of the other mesh atomizers are the mesh strips that come in your packaging.

• They are pre-cut strips that measure 16 by 6.8 mm.
• They are made out of Kanthal and ohm out at .18 ohms.
• They have a power range of 45 to 65 watts.

Because these are pre-cut it makes building on the Profile as simple as can be! Not only are these mesh strips extremely simple to work with what they have a coil life that is much greater than a traditional coil.


They tend to stay cleaner than a traditional coil and even if they do get a little gunked up, they are extremely easy to clean. Simply heat them up(at 15W-20W wattage) and brush them off. We even include a bending tool in the packaging so your mesh coil will have the perfect arc for maximum flavor.

​

 

[WotofoOfficial]

2. Spring-loaded Ceramic Platform

One of the biggest downfalls of most mesh RDA’s is when the user experiences a dry hit.

It is particularly brutal on a mesh atomizer because of all the surface area. That surface area will get you great flavor but when you dry hit it, it is not a pleasant experience.

Wotofo wanted to correct that and we came up with an ingenious idea.

A dry hit on an atomizer usually occurs when a piece of cotton is not in contact with the heating element. To guard against this we created a spring-loaded ceramic platform that your cotton can rest on.

This spring-loaded platform ensures that your cotton is always in contact with the surface area of the heating element. This significantly decreases the chances of a dry hit from the Profile RDA. The spring-loaded platform also makes this an extremely easy atomizer to wick.

Not only will the spring-loaded ceramic platform insure against dry hit but it will provide the vaper with mind blowing flavor. It does that by ensuring that the cotton is always in contact with all of the surface area of the strip. This will give you much more flavor and you will notice layers of flavor in your juice that you never noticed before.

 

[WotofoOfficial]

3. The Mesh Coil Actually Holding Its Shape Over Time

We put a lot of work into the development of this heating element. We wanted to maximize your surface area so you would get better flavor. We also wanted to make it extremely easy to work with as well as durable.

We tested other mesh coil atomizers that are on the market today and we noticed that a lot of them had a problem with the mesh actually holding its shape. This affected the flavor and contributed to the dreaded mesh coil dry hit.

When we came up with the idea for this heating element one of our main goals was to make sure that it actually holds its shape over time. We feel like we have accomplished that goal. When you use our Mesh strips you get flavor and durability.

​

The Profile RDA also takes a massive amount of cotton. This lets the user take quite a few puffs before the cotton is actually dry.

In fact when we were testing it we were able to get 25-30 puffs at 75 watts before we started to get any dry hits. Because of the amount of juice that the cotton holds, you will also get better flavor off of the Profile RDA. You will also spend less time dripping and squonking which equals more time vaping.

Because of all the reasons stated above we believe we have a game-changer on our hands!

Go out and get yourself a Wotofo Profile RDA and we are very confident that you'll agree with us. Once you try the Profile RDA, you'll understand why we think it's the best mesh atomizer on the market today.

Shop now: https://www.wotofo.com/wotofo-profile-rda.html

 

[WotofoOfficial]

With the release of our mesh style RDA, the Profile RDA, a new wave of questions about mesh heating elements and mesh RDAs emerged. Here we listed the most common questions we received on one page for easy references and honestly answered these questions without bias.

Q: Why mesh? What’s the advantage of mesh heating elements?
A: The original mesh concept dates back to the days when mesh was the wicking material. Back then, mesh already gained its good reputation of great flavor. As vape evolves, cotton wick was perceived the best wick, but people found that when mesh and cotton were mixed together, it wicks quicker and lasts longer than wire coil builds. That’s where mesh coil comes in. It does very well on flavor production, especially for fruit flavored e-juices.

Q: Mesh RDAs have been on the market for a while now, so how one-of-a-kind is the Profile RDA?
A: Previous mesh RDAs use meshes woven with strands of heating wires, but for the Profile RDA, we paired it with a perforated metal sheet in Kanthal A1 material. Such coil structure with little holes evenly punched on a single sheet can provide larger contact surface, making vaporization more efficient. It heats rapidly and has a longer life span. Yet the uniqueness is that when such mesh paired with the Profile RDA, it breaks down the mixed flavor of your eliquid into separate taste sensation.

Q: Is mesh easy to build?
A: Mesh heating elements may seem to be hard to use, but that’s when you’re not told the right way to do it. To make the building process the easiest you can have, we standardized the size of the mesh coil sheets we provide and include a bending tool to perfectly shape the mesh, making sure it curves evenly with the right angle and width. It’s a breeze to build and rebuild.

 

[nwhornet]

Got to say after the initial great results with the Profile the bubble has burst. Rewicking with anything other than the supplied cotton is a nightmare. I started getting hotspots before the original cotton was past its best & rewicking has not worked satisfactorily since. I've followed all the advise but have come to the conclusion that the mesh sheets deform too easily & contribute to the hotspot issues. Unfortunately this has meant I have held off getting a second as replacing mesh on every rewick proves too costly if the only way is using stock mesh & cotton.

 

[WotofoOfficial]

Got to say after the initial great results with the Profile the bubble has burst. Rewicking with anything other than the supplied cotton is a nightmare. I started getting hotspots before the original cotton was past its best & rewicking has not worked satisfactorily since. I've followed all the advise but have come to the conclusion that the mesh sheets deform too easily & contribute to the hotspot issues. Unfortunately this has meant I have held off getting a second as replacing mesh on every rewick proves too costly if the only way is using stock mesh & cotton.

We have to say, how many cotton should we use on the mesh coil is the biggest problem for most vapers That's why we produced the 6mm diameter agleted cotton.

Maybe you can try below tips when you use ordinay cotton:
1. More cotton is better than less.
2. Cut the cotton like below photo. Remember the top length of cotton should be longer than coil, so coil's side won't dry burning.

3. Tuck the lower cotton into the well, and fluff the cotton with tweezers.

Hope it will help you. It is very pity if you don't use your mesh rda

 

[WotofoOfficial]

 

[nwhornet]

So I bit the bullet & ordered a blue Profile & while waiting tried numerous ways to rewick & seem to have cracked it. Wicked the blue the same way & result. Was determined to get it right & eventually did.
Here's the blue sat on the Halcyon DNA200 Squonk [emoji3]

 

[WotofoOfficial]

So I bit the bullet & ordered a blue Profile & while waiting tried numerous ways to rewick & seem to have cracked it. Wicked the blue the same way & result. Was determined to get it right & eventually did.
Here's the blue sat on the Halcyon DNA200 Squonk [emoji3]View attachment 173908

Good job man!!!

 

[BULLDOG1964]

After reading all the hype on the Profile RDA i finally hit the button and ordered one yesterday along with a pack of cotton laces and some mesh.
Just cant wait to get my hands on it now............