WotofoOfficial
Postman
- Joined
- Jul 26, 2018
- Messages
- 239
INTRODUCING THE STNG MTL RDA!
WOTOFO STNG MTL RDA is co-designed by the YouTube reviewer Vapor Place (a.k.a Uncle Stas), a Russian vaper with informative tutorials on his vaping channel. It is 22mm in diameter and serves to meet the demands of all mouth-to-lung or nic salts vapers.
MTL-FOCUSED DRIP TIP
COMES RIGHT ONTO THE TOP
The narrow looking drip tip appears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung inhales. It’s made to let you enjoy your thick and rich draws of nicotine hits mouth to lung.COMES RIGHT ONTO THE TOP
CONTROLLED AIRFLOW FALLS INTO
THE CATEGORY OF CLASSIC DESIGN
The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite airflow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on.THE CATEGORY OF CLASSIC DESIGN
SINGLE-SIDED AIR INLET
INTEGRATED WITH DUAL CHANNELS
On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization.
INTEGRATED WITH DUAL CHANNELS
On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization.
COIL INSTALLING
IS WITH EASE
The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes.IS WITH EASE
SIMPLE, COMPACT,
AND SQUONK-FRIENDLY
The STNG MTL RDA is simple and compact in appearance. Bottom feeding is adopted to make juice feeding much easier, since MTL drip tips are basically all narrow in shape which makes direct dripping from drip tip impossible. But you can still pull off the top cap to do drips if you are more of a dripper person, just replace the squonk pin with the solid pin from the accessory bag.AND SQUONK-FRIENDLY
COLORS AVAILABLE
SPECIFICATIONS
RDA Type: MTL RDA
Build Deck Diameter: 22mm
Coil Configuration: Single Coil
Wattage Range: 5-30W
Recommended Ohm Value: 0.4-1.8ohm
Overall Height: 43.15mm (with drip tip and 510 pin)
Threading: 510 Thread
Body Material: Stainless Steel
Juice Feeding Method: Drip / Squonk
Insulator Material: German PEEK
INCLUDED COIL SPECS
1. Dual Core Fused Clapton Coil
Recommended for normal nicotine vaping
Material: Ni80 30G*2+38G
Resistance: 0.75ohm
Inner Diameter: 2.5mm
Number of Wraps: 6 wraps
2. Single-Strand Coil
Recommended for nic salts vaping
Material: Ni80 28G
Resistance: 1.2ohm
Inner Diameter: 2.5mm
Number of Wraps: 9 wraps
WHAT’S IN THE PACKAGE
1pc STNG MTL RDA
1pc Dual Core Fused Clapton Coil
1pc Single-Strand Coil
1pc User Manual
1pc Extra Drip Tip
1pc Cross Head Screwdriver
1pc Allen Key
1pc Cotton Strip
1bag O-rings
Let Your Throat Be The Judge: WOTOFO STNG MTL RDA
