What's new

touch-wood mini miss-firing?

Hey Rob,

I've got a Touch Wood mini myself. Haven't had any miss fires but i do strip her down every once in a wile. Have you stripped and cleaned all the internal contacts?

If not, its pretty easy (just don't undo the big screw at the bottom!!!). Unscrew the small screw in between the switch and 510 connector and gently ease off the top brass pate. Take note of where the components go, give them all a good clean (i used brasso). I also cleaned the bottom brass plate where the battery makes contact. Reassemble and check there are no shorts.

There's not much to go wrong with these so i suspect its just dirty contacts. But i could be wrong.

Hope that helps.
 
Back
Top Bottom