Lost Vape Therion jumping Ohms fix

[Vapaneezer Scrooge]

Bought a faulty Therion (sold as faulty) which I was going to strip for the DNA75c board but thought I would have a go at fixing it, the problem was a poor connection from the 510 negative post, there's an odd gap issue at the top of the connection.

Fix:
Simple(ish) soldering job, unscrew the 510 screws and wiggle out the connector for access, bridge the original solder to the underside of the top part of the 510 connector, in hindsight I would have used a small piece of 16AWG wire as bridging with just solder took a lot of flux and heat with 2 failed attempts.

It's now fixed and working perfectly, another Therion in my collection is always a good thing

If anyone has the same problem and needs a pic give me a shout.

 

[nwhornet]

Remember from when these were released people having this issue. Something to do with the way it earths through the chassis from what I recall reading on Evolv forums.