POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Billet sxk 70w

Discussion in 'Everything ECigs' started by Andrewm, May 1, 2020.

  1. Andrewm

    Andrewm Member

    Joined:
    May 1, 2020
    Messages:
    9
    Likes Received:
    2
    Hi all,

    Having a slight leak issue with the sxk. It seems to be coming from the bottom of the borrow tank. It's as if the ring of the rba doesnt seat into the o ring of the borrow tank at all. Only around 3 weeks old and seal is in perfect condition.

    Any suggestions ?

    Thanks
     
  2. Sacowin
  3. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,234
    Likes Received:
    10,380
    More likely condensation, or juice coming down the air flow of the bridge. Can look like juice is coming from the sealing O ring. What bridge are you using in the boro?
     
  4. Andrewm

    Andrewm Member

    Joined:
    May 1, 2020
    Messages:
    9
    Likes Received:
    2
    Thanks for your reply, its 100% juice, I'm using the standard rba which comes with the tank.
     
  5. Univapo
  6. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,234
    Likes Received:
    10,380
    Unless the bottom O ring has a nick it's more likely to be coming from the air hole so could be wicking is too loose. Photos of the RBA in situ & removed from boro may give more clues. Guessing you mean the Kanger RBA I only had issues if wicking was too thin on the tails.
     
  7. Andrewm

    Andrewm Member

    Joined:
    May 1, 2020
    Messages:
    9
    Likes Received:
    2
    I'll get a picture up tomorrow, it does seem to be seeping around the o ring though, the kanger base doesnt seem to sit in there but slightly above.
     
  8. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,234
    Likes Received:
    10,380
    Needs pushing down so the base of the deck is sitting on the bottom of the boro. Remove the boro from the BB and push down on the chimney from the top. Just putting out possible fixes without seeing photos. If O ring is faulty a set can be bought from Naturevape, includes red glass seal & 2 O rings.
     
  9. Andrewm

    Andrewm Member

    Joined:
    May 1, 2020
    Messages:
    9
    Likes Received:
    2
    I do push down from the chimney but the rba doesnt want to sit into the o ring. It's as if it's slightly too short. Confusing to say the least. I'll get pictures up tomorrow
     
  10. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,234
    Likes Received:
    10,380
    Have a check through the BB section of the forum. May be more info there.
     
  11. Gsmit1

    Gsmit1 Postman

    Joined:
    Sep 1, 2019
    Messages:
    199
    Likes Received:
    243
    I second this.
     
    • Like Like x 1
  12. Andrewm

    Andrewm Member

    Joined:
    May 1, 2020
    Messages:
    9
    Likes Received:
    2
    That's the seating position onto the borrow tank, it doesnt seat over the o ring. Only slightly above
     

    Attached Files:

    • Like Like x 2

Share This Page