POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Berserker mini MTL

Discussion in 'Everything ECigs' started by Cloudtastic, Sep 26, 2019.

  1. Cloudtastic

    Cloudtastic Postman

    Joined:
    Feb 14, 2018
    Messages:
    218
    Likes Received:
    88
    Tried a few before posting last night as I always do - visually I cant see any difference from them to mines - I usually have better luck with some help from the folks on here
     
  2. gaart

    gaart Postman

    Joined:
    Jul 28, 2017
    Messages:
    977
    Likes Received:
    628
    Try the old method of refilling and let's see what happens: close the airflow, open top cap, fill it, put the top cap back and start to turn it but only a bit so it catches. Turn the tank upside down, open airflow, tighten top cap.
     
    • Thank Thank x 1
  3. Cloudtastic

    Cloudtastic Postman

    Joined:
    Feb 14, 2018
    Messages:
    218
    Likes Received:
    88
    Will do bud I need to re-wick anyway in all honesty as its burnt as hell goodjob I brung the trusty Siren 2 with me as a backup :S
     
  4. Frogprince

    Frogprince Postman

    Joined:
    Mar 24, 2019
    Messages:
    268
    Likes Received:
    160
    This is the very 1st i done using one of the coils it came with. I think if anything I had to much cotton.
    20190920_130711.jpg
    2nd beserker arrived this morning so had a go at building my own coil with 28g kanthal. I used muji cotton pad and cut a strip about 6/7mm then peeled of the top and bottom layer 20190927_133334.jpg
     
    • Like Like x 2
    • Thank Thank x 1
  5. Fuctifino

    Fuctifino Achiever

    Joined:
    Nov 26, 2018
    Messages:
    1,416
    Likes Received:
    928
    ya'll be winding mixing your own juice soon

    buying yet more vape shit - yeah you're hooked
    kiss ya wallet goodbye
     
    #15 Fuctifino, Sep 27, 2019
    Last edited: Sep 27, 2019
    • LOL LOL x 2
  6. Cloudtastic

    Cloudtastic Postman

    Joined:
    Feb 14, 2018
    Messages:
    218
    Likes Received:
    88
    Your a legend mate thanks think I have been using to little cotton will use your pics tonight hopefully build me a winner :D
     
  7. Cloudtastic

    Cloudtastic Postman

    Joined:
    Feb 14, 2018
    Messages:
    218
    Likes Received:
    88
    Oh my wallets suffered for a couple of years now dude just keeps getting worse :18:
     
    • Like Like x 1
  8. Vapaneezer Scrooge

    Vapaneezer Scrooge Vendor

    Joined:
    Dec 23, 2017
    Messages:
    3,756
    Likes Received:
    3,928
    I only get leaking on MTL tanks for 2 reasons, not enough wick or stray wick toughing the airflow port but I think in this case it's not enough wick.

    @Frogprince build is how I would do it.
     
    • Like Like x 2
  9. Cloudtastic

    Cloudtastic Postman

    Joined:
    Feb 14, 2018
    Messages:
    218
    Likes Received:
    88
    Very near to launching this out the window earlier but I have made some progress.

    I have wicked it several ways now some little cotton some a lot and my current build below seems to be giving good flavour anf no burning yet (sorry about the focus)

    However the tank drinking half a tank every refil issue is still happening but I thought fek it and tried filling it from the bottom with a full tank screwed the bottom back on and guess what?...NO Leaking. What am I missing here guys?

    20190927_195942.jpg
     
  10. Frogprince

    Frogprince Postman

    Joined:
    Mar 24, 2019
    Messages:
    268
    Likes Received:
    160
    Sounds like its definately due to pressure when closing top cap if you get no leaks when bottom filling. did you try removing the large o ring from the top cap? (might be hard to see black o ring on black tank) I have removed it on both mine.
    Or could the coil be to low so to close to the air flow.

    I held mine upside down in some tissue with largest airflow open and blew into mouthpiece to get rid of any liquid still in the bottom from the initial leaking.
     
    #20 Frogprince, Sep 27, 2019
    Last edited: Sep 27, 2019
    • Thank Thank x 1

Share This Page