What's new

Aspire Odyssey - tactile switch spec?

FrankE

Member
Joined
Sep 20, 2014
Messages
6
I had a bit of an accident yesterday, typically out of vape shop hours
The unit gave the "battery low" error message despite fully charge battery so I took it apart for a service.
I cleaned up the muck, tightened the 510, reinsulated the cores and reflowed some dry and skew-whiff solder joints. Tested good so I put it back together.
While reassembling the tactile switch sheared off the PCB.
I set it aside, protected adjacent components with Kapton, fluxed up, put it under the scope. Damn! The switch has gone.

Anyone replaced one and know the part ID?
There are over 1000 SMD tactile switches on Mouser and one can't filter by pad spacing.
https://www.mouser.co.uk/Electromechanical/Switches/Tactile-Switches/_/N-5g2m?No=25&P=1z0z7pt
 
Back
Top Bottom