Tauren tube

[itscostingme]

Got my first tube today feels nice in the hand and looks the part.
So anything I need to know? Also any recommendations for a single coil RDA to stick on top?

 

[mattyk2010]

Strip the switch down and check if it needs a clean, the ball in mine came filthy [emoji4] oh and with it having a complicated switch in pieces I never fully trusted it so I always run my battery positive up in case the switch shorted which never has to date

 

[itscostingme]

Strip the switch down and check if it needs a clean, the ball in mine came filthy [emoji4] oh and with it having a complicated switch in pieces I never fully trusted it so I always run my battery positive up in case the switch shorted which never has to date

Noted thanks will get it apart tomorrow and give the ball a good clean

 

[cliveh2]

Noted thanks will get it apart tomorrow and give the ball a good clean

I found the switch, though works well a bit of a ball ache to assemble (easy enough to take apart [emoji6])
And mine rattles, but its still my favourite mech!

 

[itscostingme]

Had the switch apart. No rattling from the switch. But the ball bearing and magnets are covered with grease.

 

[cliveh2]

Had the switch apart. No rattling from the switch. But the ball bearing and magnets are covered with grease.

That's not good, and I bet the ball bearing will rattle when its clean[emoji6]

 

[Deleted member 54254]

The dielectric is supposed to be there, it's what stops the rattle.

 

[Deleted member 54254]

I see they have a new one out, say hello to the Tauren Max...

 

[cliveh2]

I see they have a new one out, say hello to the Tauren Max...

I know, and it's on offer for about $50 in one of the China sites, tempted but really cant this month.......[emoji6]

 

[Deleted member 54254]

On the positive side, Black Friday deals aren't really that far away!!