What's new

Question for hybrid mech users

Zited

Postman
Joined
Mar 17, 2020
Messages
440
Hiya this might seem like a silly question but I can't find a long enough 510 protruding pin for my drop dead rda to use on my dreamer and since I'm so cautious I don't want any problems so I don't wanna use the one I have so I'm limited to only my asgard, so I was wondering can u buy just 510 pins seperatly lol? Long protruding ones for the drop dead rda

Thanks
-Zited
 
I doubt that you could buy such a 510 that was made for that particular job.
there may be a pin for another atty that might do the job but finding it might be a problem.

I only use mechs and have never felt the urge to change a 510 pin.
If a an atty is safe on a hybrid I use a hybrid mech.
If not I use a 510 mech.
 
I doubt that you could buy such a 510 that was made for that particular job.
there may be a pin for another atty that might do the job but finding it might be a problem.

I only use mechs and have never felt the urge to change a 510 pin.
If a an atty is safe on a hybrid I use a hybrid mech.
If not I use a 510 mech.
It's just its not protruding as far as my asgard mini and I remember on one of my old posts someone commented on it being rather short
 
If it is too short, as far as I am concerned it is too short.
Probably easier to buy a non hybrid mech than messing about finding a pin that sorts the problem.
Or buy other attys with longer pins for the hybrid.
You might get lucky and find someone who knows of a longer pin that will work.

If you want a mech that will safely fire any and all attys, then that is not a hybrid mech.
I prefer the shorter length of the hybrid mechs and accept that some attys are not safe on them.
 
A photo of your teeth and fingers might be nice too...
 
You got a pic of the positive pin @Zited
Is it the same as this one


upload_2020-11-27_22-17-8.png


Because this looks fine
 
Back
Top Bottom