Billet box help

[James Leasley]

Hi potv I’m having a bit of a dilemma I’m in the market for a billet box I want a authentic billet box but I want honest opinions by people that use them.
I’m more of a mtl vaper so will probably get the nautilus bridge but I also vape dtl some times. What rbas would you recommend ? I have looked at the bastard coil and I don’t think that’s for me so what other rbas are abalible.
And last but not least how does the sxk clone suit up ?
Thanks potv

 

[keepsmiling]

Try to find an exocet or a ti flow. Clones are just a bad idea,all the way around...

 

[James Leasley]

Try to find an exocet or a ti flow. Clones are just a bad idea,all the way around...

I’ve got a authentic bastard coil and insider on the way I’m keeping my eye out for a Exocet and olgonna order a Odis in new year

 

["Hollow"]

I’ve got my Exocet and my second billet box from fast tech, the fast tech one is better built, not having much luck with the Exocet yet. I have a 2.5mm 24g kanthan contact coil at 0.66 ohms and the flavour is poor at 23watts. Any advice on builds anyone?
It’s also more restrictive than the kanger coil set up, was hoping it was more open.

Edit: Just rebuilt it with a 2.5mm 26g kanthal spaced at 0.75 ohms, at 20watts it’s better, think the 24g wire was too hot. Still up for advice if anyone can help. Thanks

 

[James Leasley]

I’ve got my Exocet and my second billet box from fast tech, the fast tech one is better built, not having much luck with the Exocet yet. I have a 2.5mm 24g kanthan contact coil at 0.66 ohms and the flavour is poor at 23watts. Any advice on builds anyone?
It’s also more restrictive than the kanger coil set up, was hoping it was more open.

Edit: Just rebuilt it with a 2.5mm 26g kanthal spaced at 0.75 ohms, at 20watts it’s better, think the 24g wire was too hot. Still up for advice if anyone can help. Thanks

Use ni80 wire spaced coils

 

["Hollow"]

Thanks, what gauge wire? I might try s spaced 26g ss316 temp build see how that goes.

Just built a ss316 build at 0.4 ohms.

Does this build look ok?

 

[James Leasley]

Ye that looks fine
And for ni80
30awg for mtl
22awg for dtl

 

["Hollow"]

Thanks, this temp build is working great now. Will stick with this one for the time being. Let me know how you find the insider.

 

[The Second Coming]

Thanks, what gauge wire? I might try s spaced 26g ss316 temp build see how that goes.

Just built a ss316 build at 0.4 ohms.

Does this build look ok?

Try trimming your wick flush and push them inside a bit. But not too far. Hold up to light to see for gaps. That worked for me

 

["Hollow"]

Thanks, I’ll try that on my next wicking try, that’s how I used to wick my Artisan Rta.