showcasing Lacy the stab wood hybrid squonk new design from the ground up

[vapesmarter]

it has has been a bit quiet this week on the forum with all the doom and gloom outside I thought I will jazz it up a bit with

Lacy.....

straight into it then

Indiana Jones series of films on the DVD all 4 that's how long it took to make lacy

I have learned a lot from Graham so I have redesigned Lacy from the ground up whilst @gazlynn tests Graham (i hope he is alright ) we shall look upon lacy and you can if you have the pennies.....own her

remember this, well this is stabilized silver birch

I'm drilling a 21mm hole for the brass tube, sleds are out so last year

mill the slot for the squonk bottle (notice "top", well that's for me the tape is to protect the sides)

all girls have beautiful curves and lacy is no different

so small slot and fitted hybrid door, magnets are in so no rattle..... none

slot the top for the MOSFET and cables

mill a slot in the top for the top panel I'm using aluminum (satin finish)

ok drill the top and countersink, then a 10mm hole then a 12mm recess for the 510 all flush no lips

first, mock up hmm no too shabby a bit of a polish and we have

boom Lacy lives give us a twirl my dear

undressed oh er misses

battery tube from the base

she is nice and curvy

so what you get with for your money is

lacy
a squonk tank
lacys leather bag
lacys travel crate

DISCLAIMER remember Lacy is an unregulated squonk mod she has a 510 and battery tube and a MOSFET but she is a semi mech mod if you have no idea about ohms law, have no idea about squonking, building coils batteries then walk away lacy is for the expert vapor

the price is including p and p is £75 normal POTV rules apply. That covers my costs that's it ! I need to recoup for the next project that money gives you a full setup shown above

In the meantime

if you love my mods, bags, cases, cabinets, stands then like them.....buy one.

 

[eshelby_dunn]

She's a sexy lil' minx, I'd like to finger Lacy's Squonk hole, but I'm not allowed to buy anything vapey until the 20th of July. [emoji24][emoji24]
After that buddy I'll happily purchase one of your stabwood squonks

Top work and top write up buddy.

 

[bellyman]

Arse.
I spent my vape budget 2 weeks ago dipping my toe into squonking.

 

[Rob]

For my tastes............... Redesign the Cutaway for the Bottle. Too restricted access for moi.

 

[chubbaduckie]

For my tastes............... Redesign the Cutaway for the Bottle. Too restricted access for moi.

Exactly what i was gonna say! My fat fingers would never fit in there.
But great work as usual mate, i really look forward to seeing with what you come up with next, great craftsmanship.

 

[vapesmarter]

For my tastes............... Redesign the Cutaway for the Bottle. Too restricted access for moi.

Exactly what i was gonna say! My fat fingers would never fit in there.
But great work as usual mate, i really look forward to seeing with what you come up with next, great craftsmanship.

yes its subjective depends on how big your fingers are I have based it on my own finger and thumb plus extra but the bottle is directly under the hole and flush with the lid and has no moment from side to side I can make the hole a little bigger if the owner wants but heres a picture

 

[WaitFor1t88]

very nice,
what 510 do you use? as I see the mm510 being raved about for squonks

 

[vapesmarter]

there is a shortage of 510 squonks at the moment I used a 12mm squonk varitube and counter sunk it flat to the top it comes with a load of spares I would use a fat daddy but because he has not been well they are thin on the ground

 

[Greebo]

Ooh. Lacy is a proper stunner.

 

[Greebo]

That is a right Billy bargain too @vapesmarter. If she was regulated I would have been all over her like a pretend lesbian in a porn film.