POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register
  1. The POTV Charity Fundraising Event for 2019 is go! Check out the prizes and make your donations here.
    Dismiss Notice

UKV Atomizer

Discussion in 'Modder's Atties' started by jim532, Sep 9, 2013.

  1. jim532

    jim532 Postman

    Joined:
    Jul 14, 2013
    Messages:
    84
    Likes Received:
    38
    Machined in Medical Grade 2 Titanium (commercially pure)
    15mm diameter
    Made with 1ml or 2ml tank (or both)
    3 top cap designs
    1,2 or 3 wicks/coils (3mm threaded wick holes)
    3 grounding holes (all open to tank to enable them to be used as fillers/breathers.
    Tip is also Titanium. Standard size, so can fit any tip.

    BTW, the first 2 pics are of Stealthvape's atty. I was building these atomisers in Aluminium. Until Rob sent me some Titanium for a Christmas prezi. I didn't even know it was coming. So there I was in the shed freezing the bollocks off on Christmas wk machining him an atty in Ti. I had never machined Ti before, so a novelty for me. Whilst I was at it, that hex driver in the pic, I made out of 316 stainless. Everyone else got an allen key :-)

    Robs atty.jpg Robs atty 5.jpg Simon's atty pic 6.jpg 2ml + 1 FLASH 3.jpg 30th April.jpg Titanium UKVA.jpg

    http://www.youtube.com/watch?v=LcHe8Bhzybg
    http://www.youtube.com/watch?v=Tmm49UBudhE
    http://www.youtube.com/watch?v=O1iBiHJrSlg
    http://www.youtube.com/watch?v=5XGowpxXAZg
    http://www.youtube.com/watch?v=PIi6jfnN9Y8
     
    #1 jim532, Sep 9, 2013
    Last edited: Sep 9, 2013
    • Like Like x 4
    • Thank Thank x 1
  2. ScottChensoda

    ScottChensoda Achiever

    Joined:
    Aug 15, 2013
    Messages:
    1,562
    Likes Received:
    265
    What about the rest of the info Jim? When and how much mate?
     
  3. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,623
    *Goes off to look at the price of brass bar*
     
  4. ScottChensoda

    ScottChensoda Achiever

    Joined:
    Aug 15, 2013
    Messages:
    1,562
    Likes Received:
    265
    Where do you get brass from Raggers? There's no brass in that.
     
  5. gary68

    gary68 Veteran

    Joined:
    Jan 21, 2013
    Messages:
    6,776
    Likes Received:
    2,329
    he is friggin obssessed with brass
     
  6. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,623
    Brass is sexy...
    I really need a steampunk mod in my life
     
  7. gary68

    gary68 Veteran

    Joined:
    Jan 21, 2013
    Messages:
    6,776
    Likes Received:
    2,329
    no Sam ,brass is high maintenance ,,brushed stainless all the way for me ,i`m a lazy get who always has dirty hands :D
     
  8. Raguri

    Raguri Nutter!

    Joined:
    Mar 2, 2013
    Messages:
    8,323
    Likes Received:
    1,623
    The wonders of clear coat ;)
    (And, sorry for hi-jacking the thread slightly!)
    But... I need a lathe :P
     
  9. Dan Dan the vaping man

    Dan Dan the vaping man Achiever

    Joined:
    May 26, 2013
    Messages:
    3,234
    Likes Received:
    534
    Went off and done the same last night, have a few sites bookmarked hehe
     
  10. thedarthVap3r

    thedarthVap3r Achiever

    Joined:
    Jun 28, 2013
    Messages:
    1,950
    Likes Received:
    316
    you get yourself one . ill be your test dummy.
     

Share This Page