POTV - Your vaping community

Wanting to join the rest of our members? Why not sign up today!

Register

Trying TC for 1st time.

Discussion in 'Temperature Controlled Vaping' started by Frogprince, Mar 21, 2020.

  1. Frogprince

    Frogprince Achiever

    Joined:
    Mar 24, 2019
    Messages:
    1,907
    Likes Received:
    1,903
    Using a vaporesso armour pro mod with beserker mini tank.

    I made a coil using 28awg 316l ss wire, 8 wraps spaced, 2.5 ID, 0.7ohms.
    With tank coiled, wicked and on the mod went into settings and selected SS for tc then locked the resistance wile the coil was cold.
    Next the tcr was default set to 0108 which ive changed to 0092 after reading on another thread that is correct tcr for 316l
    The power I set at 20w (I usually mtl at 12w)
    So now ready to try starting at 200f and upping the temp by 10f untill i get to temp i like.

    Is this correct?
    Or am I doing something wrong or missed something out?
     
    • Like Like x 1
  2. Vape Club
  3. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,263
    Likes Received:
    10,396
    All looks good to me ;)
     
    • Thank Thank x 1
  4. John R

    John R Veteran

    Joined:
    Mar 18, 2018
    Messages:
    8,897
    Likes Received:
    10,436
  5. Univapo
  6. Frogprince

    Frogprince Achiever

    Joined:
    Mar 24, 2019
    Messages:
    1,907
    Likes Received:
    1,903
    thank you.
    Is the cct setting needed? Or is it as I think custom curve setting for temp?
     
  7. John R

    John R Veteran

    Joined:
    Mar 18, 2018
    Messages:
    8,897
    Likes Received:
    10,436
    Never had a vaporesso...



    seems like a load of faff.
     
  8. Frogprince

    Frogprince Achiever

    Joined:
    Mar 24, 2019
    Messages:
    1,907
    Likes Received:
    1,903
    Agreed. Just seems overcomplicating things for little diference
     
  9. John R

    John R Veteran

    Joined:
    Mar 18, 2018
    Messages:
    8,897
    Likes Received:
    10,436
    Think you're doing the right thing, set the rampup wattage and then adjust the temp to find the sweet spot.
     
  10. Frogprince

    Frogprince Achiever

    Joined:
    Mar 24, 2019
    Messages:
    1,907
    Likes Received:
    1,903
    Yeah, less complicated than it 1st sounds once you know the correct tcr setting.
    for me it will be forgeting to lock in the resistance if anything.
    once locked in will it stay locked in if i remove the tank for filling or rewicking the same coil?
     
  11. John R

    John R Veteran

    Joined:
    Mar 18, 2018
    Messages:
    8,897
    Likes Received:
    10,436
    I'd imagine so, only one way to find out for sure :)
     
  12. nwhornet

    nwhornet Legend

    Joined:
    Feb 22, 2016
    Messages:
    11,263
    Likes Received:
    10,396
    Probably not. If the fire button gets pressed with no attie it can reset to query if a new coil has been fitted when you refit the attie. DNA boards sometimes ask new/old coil when refitting but they do remember last resistance measured so easy to say no.
     

Share This Page